Turbo Project, Gathering parts Options

[JWalk1818]

OK someone help me out on the things i need to gaather to at least get the turbo on and the car up and running!

1. 3sgte exhaust manifold
2. CT 26 Turbo
3. 3sgte downpipe

4. What do i need to tap into the oil pan?
5. how do i control the boost?

sorry im a newcomer when it comes to turbo

[97sccelica]

www.jgstools.com/turbo

get an oil feed line kit and an oil return line kit for your car and that turbo.

that will take care of the oil you will need.

the turbo should have come with an internal wastegate and an actuator. provided that you hook it up the turbo will boost to its stock levels, which i think is 8 psi if you got it from an alltrac.

my wastegate actuator is set to 4psi(adjustable from 4psi to 8psi), but i have a turbo xs boost controler which will allow me to adjust it to 12psi over what the adjustable actuator will allow me to go. i also have an electronic actuator and i will hook up which will pull the wastegate open when ever i flip the switch. it will save me some gas when i dont really want the added power and it should let the turbo run a little cooler.

i recomend that you run some sort of intercooler. for my setup, i am temporarily running an eclipse side mount intercooler. also, you will have to run either a check valve setup for your map sensor or get a 2 bar map sensor from i think an mr2 turbo(not sure where people get them.) also, it would be good to get header wrap and wrap up the DP to keep the under hood temps down, you could also wrap the turbo in it.

i know that you have a GT but if you have more specific questions go ahead and PM me.