Aug 9, 2007 - 12:23 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
just wanted to get some ideas on what people have done to eliminate the rubbing in the rear when using wide rims/tires or spacers. i have 17x7.5 45 offset rims with 15mm spacers. as soon as i put them on, the rears would rub like crazy on the inner lip of the rear fender. i cut slits into that lip and used vice grips to bend the lip up. this helped a lot and got rid of most of the rubbing, however it still does rub ever once in a while. any ideas?
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() |
Aug 9, 2007 - 7:42 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE(jesterwr217 @ Aug 9, 2007 - 4:32 PM) [snapback]586709[/snapback] my front and rear have been rolled can you post some close up pics? did they have any issues with doing the rear? -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Aug 10, 2007 - 12:16 AM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 27, '07 From cape coral/ft myers florida Currently Offline Reputation: 7 (100%) |
QUOTE(lagos @ Aug 9, 2007 - 8:42 PM) [snapback]586754[/snapback] QUOTE(jesterwr217 @ Aug 9, 2007 - 4:32 PM) [snapback]586709[/snapback] my front and rear have been rolled can you post some close up pics? did they have any issues with doing the rear? ill try to get some close up pics when i can but as far as i kno no the bodywork was all done while i was on a cruise lol so i wasnt there to see it first hand -------------------- ![]() BOOST GETS YOU LAID!!!! |
lagos wide wheels/tires rubbing ... Aug 9, 2007 - 12:23 PM
Harold_Fastwaker Rubber mallet to knock the inner liner up higher a... Aug 9, 2007 - 12:38 PM
95CelicaST Replace the 15mm spacer with a 10mm spacer? Aug 9, 2007 - 12:51 PM
lagos QUOTE(Harold_Fastwaker @ Aug 9, 2007 - 1... Aug 9, 2007 - 1:50 PM
OrbitalGT95 lower offset..tehehe Aug 9, 2007 - 2:30 PM
lagos what about fender rolling. has anyone tried it on ... Aug 9, 2007 - 2:40 PM
devilsden97 so your offset is 30 art?
what size tires are on ... Aug 9, 2007 - 2:48 PM
lagos 17x7.5 45 offset rims with 15mm spacers and 225-45... Aug 9, 2007 - 2:57 PM
devilsden97 so u have a total offset of 30 with 225s
that why... Aug 9, 2007 - 3:10 PM
lagos my offset might be 30, but the rim width is only 7... Aug 9, 2007 - 3:20 PM
devilsden97 IIRC the smaller your offset, the smaller your off... Aug 9, 2007 - 3:28 PM
jesterwr217 my front and rear have been rolled Aug 9, 2007 - 3:32 PM
devilsden97 ^photos! Aug 9, 2007 - 3:36 PM
jdg371 bring out the baseball bat! Aug 9, 2007 - 7:11 PM
bufferdan Wrap a towel around a bat and jack up the car enou... Aug 10, 2007 - 12:37 PM
OrbitalGT95 You could always try 1. buying camber plates and a... Aug 12, 2007 - 11:40 AM
Kadett I had the same problem.
I have 225/40/18 GoodYear... Aug 12, 2007 - 12:21 PM
lagos yeah i think ride height and suspension has a lot ... Aug 12, 2007 - 12:44 PM
jesterwr217 ok heres the deal lol i guess i lied its just my f... Aug 18, 2007 - 11:46 AM
jesterwr217 o and if your lowered get rid of your wheel well p... Aug 18, 2007 - 12:18 PM
eggman40 I have a fender rolling tool if anyone else has a ... Sep 6, 2007 - 9:37 PM
prowzee i use to rub cause my car is lowered but i just us... Sep 6, 2007 - 11:28 PM
lagos just an update. i ended up doing a bit more bendi... Sep 7, 2007 - 1:26 PM
Daftboy prowee do you have any better pictures of the car ... Sep 7, 2007 - 1:40 PM
lagos this one shows them off perfectly... Sep 7, 2007 - 3:54 PM
prowzee uhh.. ill try to take some photos on saturday and ... Sep 8, 2007 - 5:21 AM![]() ![]() |
| Lo-Fi Version | Time is now: May 18th, 2026 - 8:16 AM |