![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 28, '07 Currently Offline Reputation: 1 (100%) ![]() |
ok i guess this could be in teh exterior or general but i put in in teh interior.Anyway,i really like the way our celicaslook without door handles.Will someone plz tell me the procedure .Or jsut tell me another thread with teh info.Thanks!!
-------------------- BANNED. for life, you moron.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 10, '04 From Shoreline, WA Currently Offline Reputation: 4 (100%) ![]() |
I know there have been posts about it, but the quick and simple is.
> remove handels weld in place to fill hole, prep and paint. > install popper cylinders to pull the rod that pop the door (does what the hendel did but electrical) (also install cable lines and lever to pop door when cyinder does not work or power failure > install remote system or buttons to activate cylinders. > install popper springs in door cill where it has a good push point on the door. (the popper cylinders does not open the door just pops the latch, the rest > call it a day. This post has been edited by creis: Aug 10, 2007 - 2:51 AM -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: August 19th, 2025 - 2:18 PM |