Requesting 3sgte Help, pix inside, Help me figure out where these plugs go Options

[CelicaSTX02]

Hey guys,
I just got my wiring back from Dr. Tweak. I am trying to swap a ST185 3sgte into my OBD2 1997 Celica GT. There are several plugs that I don't where they go. The last mechanic I took my car to put the engine in and never got it running. Messed everything up, so now I have to fix it. Please take a look at these pictures and tell me if you see something wrong and also let me know what these plugs are and where they should go. In the meantime, I will do research and look through old posts to figure it out myself, but if you happen to just know, please post and save me some time. Thank you very much in advance for your help!!

-Anh-Tuan
















This post has been edited by CelicaSTX02: Aug 11, 2007 - 4:49 PM

[WannabeGT4]

1. MAP Sensor
2. T-VIS... under intake manifold
3. Knock Sensor... under intake manifold
4. Fuel Injector Resistor Pack... Missing the plug
5. I have a bolt where that sensor is.
6. Water temp gauge
7. Turbo VSV... under intake manifold
8. ?Random Relay?
9. Resistor pack plug for 3rd gen.
10. ?Noise suppressor?

This post has been edited by WannabeGT4: Aug 11, 2007 - 5:40 PM

[toyotacrazy]

1. MAP Sensor
2. T-VIS... under intake manifold
3. Knock Sensor... under intake manifold
4. Fuel Injector Resistor Pack... Missing the plug
5. I have a bolt where that sensor is.
6. Water temp gauge
7. Turbo VSV... under intake manifold
8. ?Random Relay?
9. Resistor pack plug for 3rd gen.
10. ?Noise suppressor?

sounds right to me. The noise surpressor needs to be grounded. I just mounted mine on the back side of the intake manifold.