cutting crashbar, gt4 convo Options

[lubu]

Does anyone have a picture of their crash bar cut down by a sawzall. Im fittting a c-one bumper and apparently it doesnt fit coz the crashbar is in the way..just how much you need to cut down the bar?

edit: I thinking of fitting the proper crashbar for safety sake so i went to toyotaworld.com and typed in the frame bracklet no#, but they didnt work.

Frame Bracket RH 57201-20060 this is the bracket that the re-bar bolts to, it replaces your stock one
Frame Bracket LH 57202-20070 this is the bracket that the re-bar bolts to, it replaces your stock one

This post has been edited by lubu: Aug 16, 2007 - 4:27 AM

[azian_advanced]

you'll have to call in and ask for those frame bracket pieces... it won't work on their website.

also, if you decide to cut the crashbar, it won't sit flush with the bumper absorber and will have about a 1" gap.

but if you decide to cut it anyway, here are the pics:

i first thought that this was simply ALL BOLT ON but really wasn't. i mean, it was but it wouldn't fit and line up correctly... so a couple of things (for you future gt-four convertors) that needed modifications were:

1. cutting the st205 reinforcement bumper
2. the gap to fill between the bumper and hood

the reinforcement bumper was not a direct bolt-on job... the front frame rails where the re-bar bolts on to is different on the gt4's.

this is how it appears when you have it against the frame rails...


as you can see, the bottom is far too forward for the upper threading to fit through...

this is how it looks after being cut (using an impact metal sheet cutter):



and here it is when bolted on




another thing which i totally missed is when you have the bumper installed, the bar sits slightly higher than it should be. right now, it doesn't fit in the groove on the bumper absorber. that may be because my car was in a previous front end accident and things aren't lining up 100% perfect.

finished gt4 conversion