Aug 20, 2007 - 9:08 PM
|
|
|
Enthusiast ![]() ![]() Joined Jul 29, '07 From Quebec, Canada Currently Offline Reputation: 0 (0%) |
Hi, im finishing my swap (185rc in 6th gen gts) and i get a code 54, intercooler low level or pump disfunction. I tried to ground the pink wire and all that ive found to try on internet, doesnt work.
finally, i found that a intercooler ecu exist in the 185rc. I dont have it. Is there any way to bypass the code. For example, if you use a front mount setup you surely have the tip to clear the code 54 from the ecu. HOW !!!!??? Thanks for help!!! |
![]() |
Aug 20, 2007 - 9:21 PM
|
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
You don't need the inter cooler ECU. All you need to do is ground the pink wire on the ecu. Don't forget to reset the CEL codes once you ground the correct wire.
I'll see if I can find my old thread. -------------------- ![]() I will return one day. |
domyz ST185RC Intercooler Aug 20, 2007 - 9:08 PM
domyz i did what you say but the code is always there, w... Aug 21, 2007 - 7:44 AM
Defgeph I can't find my old threads about this. The se... Aug 21, 2007 - 10:17 AM
Defgeph Look at page 5
That should have the answer you ... Aug 21, 2007 - 10:29 AM
domyz this page dont tell me a lot about this problem, e... Aug 21, 2007 - 11:04 AM
domyz bump! still waiting for the info to finish my ... Aug 22, 2007 - 11:25 AM
WannabeGT4 Look at the back of the 22 Pin connector. On the b... Aug 22, 2007 - 5:32 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 12th, 2026 - 8:09 PM |