 How to flush/change coolant? |
 Aug 22, 2007 - 3:35 PM
|
 
|
|
Enthusiast  Joined Jul 29, '07 Currently Offline Reputation: 2 (100%)  |
anyone got a writeup for this? and how much coolant is needed and such...my coolant is NASTY, watery...
|
 |
Replies
|
Aug 23, 2007 - 12:49 AM
|
|
 Enthusiast Joined Dec 12, '06 From Fob Sharana, Afghanistan Currently Offline Reputation: 2 (100%) |
QUOTE(Komail @ Aug 22, 2007 - 4:35 PM) [snapback]589970[/snapback] anyone got a writeup for this? and how much coolant is needed and such...my coolant is NASTY, watery... The DRAIN Tab is located on the bottom left of your Radiator. It looks like a small white plastic toilet flusher. You can do that or you can do it the quick ghetto way by unplugging the Bottom Hose from the Radiator and that will flush everything out like crazy. Then clip it back on so that you can poor in some WATER into the Radiator from the top. After your poored in the water, let the car run for about 30 seconds to rinse all the nasty crap out, then FLUSH it again! Then plug it back and it should only take 75% of a Coolant Bottle from Autozone to fill up the radiator. After you fill it up full from the radiator, run the car so the radiator fluid flows into the engine, and fill in more while your engine is on so that way you can fill it up Fully and bleed air at the same time. After your done filling, twist the Radiator Cap back on and engine your new cooled engine. This post has been edited by FortuneCookie: Aug 23, 2007 - 12:50 AM |
Posts in this topic
Komail How to flush/change coolant? Aug 22, 2007 - 3:35 PM
punkuup5150 at least itdoesnt look like mine did it was orange... Aug 22, 2007 - 4:51 PM cHinaman727 I went to oriellys and got some peak 50/50 coolant... Aug 22, 2007 - 5:06 PM Komail . Aug 22, 2007 - 7:17 PM
eyohannie Not to thread hijack, but:
1) Do you need to remo... Aug 22, 2007 - 8:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 12th, 2026 - 12:19 AM |