6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3rd gen guys???Need help tunning, Need help!
post Aug 24, 2007 - 5:21 PM
+Quote Post
lantz2121

Enthusiast
**
Joined Jun 27, '04
From ohio
Currently Offline

Reputation: 7 (100%)




I can't seem to get the "Light Bulb" bypass circit to work properly. My car is in low boost mode code 54. I have the wiring diagram for tricking the ecu, but Mine doesn't seem to be working corectly. It originally worked bulb stayed light for a while and would shut off untile the gas was applied. Now the check engine light comes right on??? Also do these cars normally run very hot? this is my first turbo car and it sems extremely hot but the temp guage is in the middle.

The car hits fuel cut or is in low boost mode how do I correct this issue? Spits and sputters arround 4500-5000
Also does anyone know if there are any toyota models with the same speed sensor? my speedo doesn't seem to be working. Lance

This post has been edited by lantz2121: Aug 24, 2007 - 5:32 PM
 
Start new topic
Replies
post Aug 27, 2007 - 3:29 PM
+Quote Post
scothaniel

Enthusiast
***
Joined May 1, '03
From Michigan
Currently Offline

Reputation: 0 (0%)




So it was working with the light bulb trick and then stopped? Loose wire, or did the bulb burn out?

By running hot, do you mean the water temp or EGT's? Generally speaking, a boosted motor generates more heat then a NA. I bought the Koyo racing radiator and haven't had any problems with water temps.


--------------------
Scott
West Michigan
post Aug 27, 2007 - 10:53 PM
+Quote Post
lantz2121

Enthusiast
**
Joined Jun 27, '04
From ohio
Currently Offline

Reputation: 7 (100%)




QUOTE(scothaniel @ Aug 27, 2007 - 8:29 PM) [snapback]591292[/snapback]

So it was working with the light bulb trick and then stopped? Loose wire, or did the bulb burn out?

By running hot, do you mean the water temp or EGT's? Generally speaking, a boosted motor generates more heat then a NA. I bought the Koyo racing radiator and haven't had any problems with water temps.


It was working in the garage but i have finally been driving her. The light would come on and function normally before, it would go off until the gas was applied and then re-light. now it won't even light up. I am in the process of pulling it all out again and starting fresh one more time. My stock temp gage is reading that the water temp is normal right in the middle...I just wanted to know if these cars run hot? seems to be very hot under the hood. Also do you have a part # for the bosch relay you are using and is there wiring involved to get the speedo to work? All other factory guages work. I'm thinking it is a broken speed sensor. I can drive her to you know if that would help speed things up...and you are free I still owe you dinner or some drinks. I really want to see how hard she pulls under full bost, It's going to be wicked fast!! Thanks Guys Lance

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 14th, 2025 - 2:07 PM