 AFM |
 Aug 27, 2007 - 7:14 AM
|
 
|
|
Enthusiast  Joined Aug 14, '05 From St. Paul, MN(USA) Currently Offline Reputation: 8 (100%)  |
I have a 3s swap and was wondering if i needed the AFM for the motor to run? The AFM and the plug that goes into the AFM doesn't match up.
|
 |
Replies
|
Sep 1, 2007 - 10:55 PM
|
|
 Enthusiast Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
Do not run ECU P/N 89661-2B280 with AFM P/N 22250-74250. That ECU is NOT meant to be used with RC AFM!
Install ECU P/N 89661-2B310 immediately! The good news is that all the other part numbers you listed are for the GT4RC. You'll need to figure out which one of the plugs has a wire going to VS on the ECU. That is the plug you need to use. Some where in the harness that plug will have been spliced into wires which end up at E2, VC, VS, and THA. --------------------  Project ST204.5 99.88946% complete... |
Posts in this topic
team_omega AFM Aug 27, 2007 - 7:14 AM
WannabeGT4 If it's a second gen swap you will.
You proba... Aug 27, 2007 - 12:00 PM devilsden97 your afm could be from a 4agZe Aug 27, 2007 - 12:41 PM
toyotacrazy QUOTE(devilsden97 @ Aug 27, 2007 - 12... Aug 27, 2007 - 7:37 PM team_omega here the pix of the AFM plug, the both slot on the... Aug 30, 2007 - 10:12 AM lagos thats the plug for your igniter. Aug 30, 2007 - 10:58 AM Defgeph I dont think thats an RC wiring harness. My colors... Aug 30, 2007 - 1:51 PM WannabeGT4 That's an igniter plug... It can be modified t... Aug 30, 2007 - 2:38 PM team_omega Ok i have two plugs that looks like this but this ... Sep 1, 2007 - 9:36 PM WannabeGT4 Post your part numbers!
What are the wire col... Sep 1, 2007 - 9:40 PM team_omega The AFM part number 22250-74250
The ECU part numb... Sep 1, 2007 - 10:33 PM team_omega how could i bypass this without using it the AFM? ... Sep 11, 2007 - 10:47 PM WannabeGT4 You could buy buy a stand alone or the MAP ECU. Sep 12, 2007 - 7:30 AM team_omega im not too familiar with piggybacks. will this pl... Sep 12, 2007 - 10:29 AM WannabeGT4 The MAPECU needs to be hard wired but it comes wit... Sep 12, 2007 - 11:55 AM team_omega QUOTE(WannabeGT4 @ Sep 12, 2007 - 11... Sep 12, 2007 - 10:55 PM lagos its in your engine bay. Sep 12, 2007 - 11:24 PM team_omega QUOTE(lagos @ Sep 12, 2007 - 11:24 P... Sep 12, 2007 - 11:42 PM lagos i meant the connector for the afm. the pic of the... Sep 13, 2007 - 12:14 AM team_omega QUOTE(lagos @ Sep 13, 2007 - 12:14 A... Sep 13, 2007 - 7:04 AM WannabeGT4 Post a pic of the other plug and wire colors. I ca... Sep 13, 2007 - 9:27 AM lagos QUOTE(team_omega @ Sep 13, 2007 - 8... Sep 13, 2007 - 12:24 PM team_omega QUOTE(lagos @ Sep 13, 2007 - 12:24 P... Sep 13, 2007 - 10:45 PM team_omega here some pix i took and i need to know where that... Sep 30, 2007 - 5:24 PM WannabeGT4 Plug one is for the AFM. If it doesn't fit bus... Sep 30, 2007 - 6:47 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2025 - 3:40 PM |