Brand SPANKIN' New Pics (56k WARNING), Comments welcome! Options

[GotToyota]

Hello guys, I just cleaned up my car really well and took some (at least in my opinion), good pictures of the car. Please feel free to give me critiques and opinions, I like being told things from a different prespective.

Last night I Dynamat'd my two front doors and my trunk. I also shaved off the rear emblems. Now, the car is stock except for an Alpine headunit, along with Rockford Fosgate front speakers, but I'm getting exhaust done within 2-3 weeks, so watch for new pics.






















Factory Toyota wheels, but I'm not sure if they're from a Celica or not, either way, I like them.





Comments are appreciated.

-Matt

[spolski07]

Haha, touche'! It's a great setup.

And goferris, The CC isn't sunken in, the bezel is slightly sticking out because of the headunit install. I haven't really taken the time to fix it, the headunit just needs to be moved back slightly. And I do have a passenger tweeter cover, it's just that the little clip that holds it in place snapped off, came like that with the car. I'll get around to fixing it one of these days.

how did you mount your 6.5's in the front? i need to redo mine cause it was hurried.
and still need to decide which speakers to put in the back.. most likely the punch 6.5's and decide on a good 4-channel amp to power those speakers... im thinking fosgate P400-4
also.. maybe 2 fopsgate P3's in the hatch powered by a fosgate P1000-1bd mono block amp?

[GotToyota]

Haha, touche'! It's a great setup.

And goferris, The CC isn't sunken in, the bezel is slightly sticking out because of the headunit install. I haven't really taken the time to fix it, the headunit just needs to be moved back slightly. And I do have a passenger tweeter cover, it's just that the little clip that holds it in place snapped off, came like that with the car. I'll get around to fixing it one of these days.

how did you mount your 6.5's in the front? i need to redo mine cause it was hurried.
and still need to decide which speakers to put in the back.. most likely the punch 6.5's and decide on a good 4-channel amp to power those speakers... im thinking fosgate P400-4
also.. maybe 2 fopsgate P3's in the hatch powered by a fosgate P1000-1bd mono block amp?

I had mine put on at my work, Best Buy. I heard they were a bit of a pain to do, so I just had them do it. I believe they cut out the old speaker and used that same mount, then drilled in the new speaker. It worked pretty well.

And that setup would work well, only Rockford stuff is expensive. I only have my speakers because I got a good deal on them.

-Matt

This post has been edited by GotToyota: Sep 4, 2007 - 1:33 PM