6G Celicas Forums

Welcome Guest ( Log In | Register )

> Metal friction sounds, coming from my wheel
post Sep 8, 2007 - 9:08 PM
+Quote Post
NaderG

Enthusiast
***
Joined May 13, '07
From riverside, ca
Currently Offline

Reputation: 0 (0%)




When i drive in a narrow street i can hear a churning metal sound coming from my rear left wheel ... what is that ? and how to fix it ? .... i am a big noob but can it be the wheel bearing ? or like the brakes are stuck somehow ?
 
Start new topic
Replies
post Sep 8, 2007 - 11:54 PM
+Quote Post
mneal2_92788



Enthusiast
****
Joined Nov 7, '06
From Lawrence IN, 46226
Currently Offline

Reputation: 17 (100%)




jack up the rear of the car, remove wheel. remove teh lower bolt on the back of the caliper, twist the caliper up. remove brake pads.


or just take the wheel off and look at the brake pads w/ the caliper on. there should be no less than 1/8" of pad left. or else it is time to change.

Posts in this topic
- NaderG   Metal friction sounds   Sep 8, 2007 - 9:08 PM
- - Blakout16   does it vibrate at higher speeds? and if you jack ...   Sep 8, 2007 - 9:50 PM
- - NaderG   vibration : i will not feel any vibration because ...   Sep 8, 2007 - 9:56 PM
- - MaskedMan   could also be the heat shield for the rotors rubbi...   Sep 8, 2007 - 10:28 PM
- - Blakout16   take a look at everyting back there... make sure t...   Sep 8, 2007 - 10:33 PM
- - mneal2_92788   mine did similar, check brake pads   Sep 8, 2007 - 10:51 PM
- - NaderG   This will sound stupid : how do i check the brake ...   Sep 8, 2007 - 11:48 PM
- - mneal2_92788   jack up the rear of the car, remove wheel. remove ...   Sep 8, 2007 - 11:54 PM
- - LewFX   you can always come and see me, i can help you out...   Sep 9, 2007 - 10:30 AM
- - ShadowSX   I had the same problem. Brakes were not releasing ...   Sep 9, 2007 - 10:41 AM
|- - NaderG   QUOTE(ShadowSX @ Sep 9, 2007 - 3:41 ...   Sep 9, 2007 - 10:48 AM
- - LewFX   master cylinders are expensive bout 100 bux http:/...   Sep 9, 2007 - 10:49 AM
- - NaderG   well , i will jack up the car in a moment and take...   Sep 9, 2007 - 10:58 AM
- - NaderG   just finished my inspection , the wheel does not j...   Sep 9, 2007 - 12:19 PM
- - LewFX   the wheel doesnt have to jiggle for a bad bearing....   Sep 9, 2007 - 4:17 PM
|- - NaderG   QUOTE(LewFX @ Sep 9, 2007 - 9:17 PM)...   Sep 9, 2007 - 6:09 PM
- - LewFX   take tire off, use lug nuts to tighten rotor...wit...   Sep 9, 2007 - 8:23 PM
- - NaderG   i will do that next weekend   Sep 9, 2007 - 9:11 PM
- - Batman722   it could be your e brake shoes. When they wear, th...   Sep 9, 2007 - 9:55 PM
- - NaderG   hmm , well , the E-brake does hold the car in plac...   Sep 9, 2007 - 10:04 PM
- - 808celica   just shot my brakes with brakleeen thingy and the ...   Sep 10, 2007 - 5:26 AM
|- - NaderG   QUOTE(808celica @ Sep 10, 2007 - 10...   Sep 10, 2007 - 5:43 PM
- - NaderG   Any bod got any info about the brakleeen thingy ?   Sep 11, 2007 - 11:01 PM
- - mneal2_92788   brake cleaner. just spray it on the rotor, and the...   Sep 12, 2007 - 12:04 AM
- - NaderG   QUOTE(mneal2_92788 @ Sep 12, 2007 - 5...   Sep 12, 2007 - 12:18 AM
- - 808celica   QUOTE(NaderG @ Sep 12, 2007 - 5:18 A...   Sep 12, 2007 - 1:38 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 24th, 2026 - 4:24 AM