Sep 12, 2003 - 4:34 PM
|
|
|
Enthusiast ![]() Joined Aug 5, '03 Currently Offline Reputation: 0 (0%) |
Ok ... I've kinda noticed that there is some parts that are similar on the MR2 and the 6gen Celis ... so could someone clarify the similarity between the two. Are they completely different or is there similarities in the tranny or engine or whatnot? Any tips would be helpful cause I wanna figure out what kind of parts I can use on a 6gen. Considering there's not much out there made specifially for 6gens .. I think must of you guys know what I'm talkin about.
|
![]() |
Sep 13, 2003 - 1:29 AM
|
|
|
Enthusiast ![]() ![]() Joined Dec 21, '02 From Orlando Currently Offline Reputation: 0 (0%) |
Nearly all aftermarket parts for the MR-2 3S-GTE can be used on a All-trac or GT-4 motor with little or no modification. Some of the more obvious things that involve piping or certain fitting in the engine bay cannot. Only those things are similar. The only other thing similar is the 7A-FE and the 4A-GE or 4A-GZE motors. The blocks are somewhat similar, but the heads are different. Parts aren't interchangeable here. If I'm wrong, someone correct me.
|
Wishful3S-GTE Celica = MR2? Sep 12, 2003 - 4:34 PM
Matthew you can swap in the engine
the transmission wont ... Sep 12, 2003 - 4:45 PM
GeEkBoY You can use the MR2 tranny in the celica but you n... Sep 12, 2003 - 5:07 PM
GeEkBoY sorry, messed up Sep 12, 2003 - 5:07 PM
Wishful3S-GTE So without the engine swap you really can't us... Sep 12, 2003 - 6:31 PM
Wishful3S-GTE Anyway ... which would be better for tuning ... a ... Sep 12, 2003 - 8:35 PM
jayi12-15psi as far as performance goes, I think most people wi... Sep 13, 2003 - 2:47 PM
Wishful3S-GTE Yea ... that's what I meant. MR2 3s-gte ~ Celi... Sep 14, 2003 - 7:12 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 25th, 2026 - 6:13 PM |