 3sge --> 3sgTe, is it straight bolt on? |
 Sep 28, 2007 - 7:23 AM
|
 
|
 Enthusiast  Joined Aug 3, '07 From Bellevue, Nebraska Currently Offline Reputation: 28 (100%)  |
I've looked around and done searches... can i take the turbo from the 3sgte and bolt it, and everything with it (pipes/intercooler/mani), straight onto a 3sge? i know i'll at least need the 3sgte wiring harness, but is there anything else i need? sorry, noob here.
-------------------- ~Andy
 Check out my Droid Goodies | My Flickr |
 |
Replies
|
Sep 28, 2007 - 8:05 PM
|
|
 Enthusiast Joined Aug 9, '06 From Ma Currently Offline Reputation: 1 (100%) |
Not quite so fast.....
You will also need to fab oil feed/drain. And the coolant lines if you want to keep the CT26 water cooled [good idea]. And you will have to mod some of your GE harness to work with your GTE ECU [unless you keep the GE ECU and piggyback ect]. You will also need a positive pressure MAP sensor [does the GE even have a MAP sensor? The older ones are MAF not MAP based]. --------------------  |
Posts in this topic
stetsonaw 3sge --> 3sgTe Sep 28, 2007 - 7:23 AM
Supersprynt Yeah it'll bolt on. Intercooler won't.
Wh... Sep 28, 2007 - 8:17 AM stetsonaw just thought you may need the wiring harness... i... Sep 28, 2007 - 9:04 AM Supersprynt No you don't need to swap any of that. You can... Sep 28, 2007 - 10:36 AM stetsonaw awesome, thats what i thought, ya know, 3sgTe just... Sep 28, 2007 - 6:39 PM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 21st, 2025 - 7:46 PM |