6G Celicas Forums

Welcome Guest ( Log In | Register )

> Oxygen Sensor Circuit
post Sep 22, 2007 - 8:47 PM
+Quote Post
djyohimbe

Enthusiast
*
Joined Jul 16, '05
From Vancouver, BC Area
Currently Offline

Reputation: 2 (100%)




My 96 ST is idling low and rough, so I checked the fault codes and got 2:

P0130 O2 Sensor Circuit Malfunction (Bank 1 Sensor 1)
P0133 O2 Sensor CKT Slow Response (Bank 1 Sensor 1)

Does this mean replace the O2 Sensor, and if so, which one (Cali car)?
 
Start new topic
Replies
post Oct 4, 2007 - 4:36 PM
+Quote Post
NuclearHappineS

Enthusiast
*
Joined Oct 17, '04
From St Louis, MO
Currently Offline

Reputation: 0 (0%)




check the codes again... sometimes sensor circuit means the sensor wiring, or the sensor's heater has failed ...

so check again to make sure the heater's wiring isn't burnt up or anything...

also check/clean your idle air control valve... that's basically what sets your idle... if it's clogged or sticking you won't get a CEL but it won't idle right...

after those 2 check out i'd move onto a tune up...


--------------------
2005 MB C200 Kompressor- K&N, Apexi WS2 Catback, DIY Voltage stabilizer, Intrax Springs, H&R RR swaybar, VDO Boost Gauge @ 6psi, Greddy L7 plugs, +0 Rear tires
To Do: E-manage Ultimate tuned up to 12psi

Posts in this topic
- djyohimbe   Oxygen Sensor Circuit   Sep 22, 2007 - 8:47 PM
- - Blakout16   i'd bank on the one right on the manifold...   Sep 22, 2007 - 8:49 PM
- - Bitter   yes, the primary sensor could be the cause of this...   Sep 23, 2007 - 10:34 AM
- - purplegt4   i got mine from oxygensensors.com   Sep 23, 2007 - 1:25 PM
- - djyohimbe   I replaced the Oxygen sensor yesterday. The check ...   Oct 3, 2007 - 10:09 AM
- - alltracman78   Tune up? EGR valve? Carbon buildup? Could be ALOT...   Oct 4, 2007 - 2:39 PM
- - NuclearHappineS   check the codes again... sometimes sensor circuit ...   Oct 4, 2007 - 4:36 PM
- - TRD_GT   Hey guys,this is off the topic so i apologise..but...   Oct 4, 2007 - 5:04 PM
|- - alltracman78   Neither of those is for the heater circuit. That i...   Oct 4, 2007 - 5:36 PM
- - TRD_GT   Yeh i have a 3SGE..i know the IAT sensor is the li...   Oct 4, 2007 - 5:41 PM
- - alltracman78   Should yes. I"ve never worked directly on a g...   Oct 4, 2007 - 5:44 PM
- - TRD_GT   I'm not really replacing them..more like wirin...   Oct 4, 2007 - 6:17 PM
- - djyohimbe   I noticed the rough idle only occurs when I step o...   Oct 6, 2007 - 12:09 PM
- - Bitter   you have an automatic and it only idles rough in D...   Oct 6, 2007 - 12:37 PM
- - djyohimbe   I actually have a 5-speed.   Oct 7, 2007 - 1:27 PM
- - Bitter   do your brakes feel fine?   Oct 7, 2007 - 2:39 PM
- - alltracman78   ^ His ECU is MAP based. A vacuum leak won't ca...   Oct 7, 2007 - 7:34 PM
- - djyohimbe   QUOTE(alltracman78 @ Oct 7, 2007 - 5...   Oct 8, 2007 - 10:03 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: June 17th, 2025 - 8:32 PM