6G Celicas Forums

Welcome Guest ( Log In | Register )

> Turbo timer in the 5sfe, Finding the right wires!
post Aug 20, 2003 - 3:32 PM
+Quote Post
DG_Performance



Enthusiast
***
Joined Jun 21, '03
From Pennsylvania
Currently Offline

Reputation: 3 (100%)




Has anyone ever installed a turbo timer in a 5sfe? I know it sounds kinda dumb but you do not need a turbo to run one!!! Anyway....I am getting ready to put one in and thought it might make my job easier to ask someone on here first. I would like to know the location and colors of the wires to tap into. Or if someone has a manual that can look up a few wires for me, that could help!
GT-4 people might be able to help me out????
The wires can't be that much different??
I really only need : speedo wire, ign on, start, ign acc, and emer brake!!!!
Any info is welcome...


--------------------
IPB Image
 
Start new topic
Replies
post Sep 18, 2003 - 10:08 AM
+Quote Post
DG_Performance



Enthusiast
***
Joined Jun 21, '03
From Pennsylvania
Currently Offline

Reputation: 3 (100%)




All you need to do is find the:

ACC wire... I used the one that goes to the clock

Batt wire... Can hard wire to fuse box or tap into any pos wire that is always on

IGN wire... he was right it is the black with orange stripe(not sure for the st ) all you need to do is hook up a multimeter to it and turn the key to that position and see if it gives you a voltage.(just to be safe for you st people)

Ebrake wire... under the center console right where e-lever is (one wire)

I actually have not hooked up the speedo wire yet and it works already ????
(I am having trouble finding it)

That is an interesting point about the headlights but i always turn mine off before i get out of the car so i will have to check on that???? Good look on that!


--------------------
IPB Image

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 19th, 2025 - 4:23 AM