![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 21, '03 From Pennsylvania Currently Offline Reputation: 3 (100%) ![]() |
Has anyone ever installed a turbo timer in a 5sfe? I know it sounds kinda dumb but you do not need a turbo to run one!!! Anyway....I am getting ready to put one in and thought it might make my job easier to ask someone on here first. I would like to know the location and colors of the wires to tap into. Or if someone has a manual that can look up a few wires for me, that could help!
GT-4 people might be able to help me out???? The wires can't be that much different?? I really only need : speedo wire, ign on, start, ign acc, and emer brake!!!! Any info is welcome... -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) ![]() |
I dont have a speedo with mine, im assuming that the HKS one has that so that it can automatically set the timer. I think i have that i have to check but i have A/F ratio, O2 sensor and voltage in mine, and its the size of a pen.
On the GT the Battery wire is white, the IG2 is Blue w/red stripe, and the IG1 is Black w/Orange stripe. The ebrake is just the single wire that plugs into the brake, i used an electrotap and its really simple to use, no cutting or splicing. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 19th, 2025 - 4:24 AM |