Oct 23, 2007 - 1:19 PM
|
|
![]() Enthusiast ![]() Joined Oct 19, '07 From Québec, Canada Currently Offline Reputation: 0 (0%) |
Here it is, on my celi, the heater motor won't run, but there's 12v and ground on the connector (directly on the motor) But when I test the motor directly on the battery, with jumper wires, the motor works!! Did I miss something here?
-------------------- |
![]() |
Oct 23, 2007 - 6:45 PM
|
|
![]() Enthusiast ![]() Joined Oct 19, '07 From Québec, Canada Currently Offline Reputation: 0 (0%) |
Ok I'll check for that, thanx kerosene! Just realize one thing though, There's 12v on the motor connector only when it's disconnect from it! When connected, I'm backprobing the connector ans there's nothing. The motor is it short to ground? Cuz when I jump it direct to the battery, it works, anyway, I'm totally busted with that:/
This post has been edited by HorseHead: Oct 23, 2007 - 6:46 PM -------------------- |
HorseHead Heater Motor Problem Oct 23, 2007 - 1:19 PM
HorseHead The motor, installed on the car, will not work, at... Oct 23, 2007 - 3:15 PM
kerosene check the cables from the unit... the black and bl... Oct 23, 2007 - 4:34 PM
kerosene look at your hubby's car... and compare... eas... Oct 23, 2007 - 6:50 PM
HorseHead Looks like I don't have any other choices thou... Oct 23, 2007 - 9:42 PM
kerosene have you checked fuses? that would explain why it ... Oct 23, 2007 - 10:02 PM
HorseHead Yes, there's one in the engine bay(40A), one u... Oct 23, 2007 - 11:43 PM
kerosene QUOTE(HorseHead @ Oct 23, 2007 - 11... Oct 24, 2007 - 12:13 AM
HorseHead Lolll looks like a private conversation!! ... Oct 24, 2007 - 12:22 AM
HorseHead Ok I've found the problem.
Here it is, The bl... Oct 24, 2007 - 3:15 PM
kerosene Np ^^ it was my pleasure, as much as i helped atle... Oct 24, 2007 - 3:36 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 2nd, 2026 - 12:13 PM |