 3SGE VS 3SGTE |
 Oct 24, 2007 - 8:04 AM
|
 
|
 Enthusiast  Joined Sep 21, '07 From FL Currently Offline Reputation: 0 (0%)  |
Do these two motors have the same internals? (pistons, rods, etc) I am asking because I know someone giving away a 1st gen 3SGE. Would the internals be able to hold up to an aftermarket turbo setup?
|
 |
Replies
|
Oct 24, 2007 - 8:20 AM
|
|
|
Enthusiast Joined Sep 21, '07 From FL Currently Offline Reputation: 0 (0%) |
I see, the bore and stroke are the same but the compression is a bit higher than the turbo. Sad to say the first gen 3S has as much HP as my 5SFE
 Say you were going to rebuild an engine and add a turbo and your choices were a 86-89 3SGE and a 90-95 5SFE, which would you choose? Wouldn't the "GE" have greater results? Correct me if I am wrong (seriously) but I can throw in some 3SGTE pistons and keep the rods and crank the same which would give the same specs as a 1st gen 3SGTE? Are the heads the same? SORRY FOR ALL THE QUESTIONS, I JUST DO NOT WANT TO MISS OUT ON A CHANCE FOR A FREE ENGINE (WITH POSSIBLE POTENTIAL!) This post has been edited by cv7713: Oct 24, 2007 - 8:31 AM |
Posts in this topic
cv7713 3SGE VS 3SGTE Oct 24, 2007 - 8:04 AM
Supersprynt Yes you can turbo it. Results may vary on the cond... Oct 24, 2007 - 8:08 AM Supersprynt Yes the GE is a different head, and it will allow ... Oct 24, 2007 - 8:59 AM Kadett 1st gen 3S-GE puts out 150 BHP, you could turbo it... Oct 24, 2007 - 11:02 AM JDcelica I also have a question on the 3sge, but its the Be... Oct 25, 2007 - 4:47 PM Supersprynt Yes you can boost it. No they aren't the same ... Oct 26, 2007 - 3:02 PM JDcelica Thanks. Do you think the Beams engine can handle ... Oct 26, 2007 - 4:18 PM
Kadett QUOTE(JDcelica @ Oct 26, 2007 - 11:1... Oct 27, 2007 - 1:11 PM JDcelica thanks for the response. glade i dont have any eng... Oct 27, 2007 - 1:22 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 3:15 AM |