![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 16, '06 From Bowling Green KY Currently Offline Reputation: 7 (100%) ![]() |
after doing some research (and procrastinating) i have figured out that my ignition signal circuit is messed up.
that, however, is something i don't really have much knowledge of. my car wouldnt start on occasion sometimes but i figured it was just a bad starter because eventually it would start after a few tries. But me being the poor kid that i am, i never got around to fixing it. but anyways could someone please explain to me what needs to be done/ checked in detail? -------------------- **If you play My Brute, joing the 6gc.net clan!**
--A section of a kid's actual test that had been scanned-- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 16, '06 From Bowling Green KY Currently Offline Reputation: 7 (100%) ![]() |
well i found a working used distributor locally for only 60 bucks, so i snagged that thinking i'll just replace the whole distributor since the igniter could be bad. well it didn't fix the problem. so what the hell else is wrong? someone give me some feedback, i really need to drive.
This post has been edited by tonytutino: Oct 29, 2007 - 11:49 AM -------------------- **If you play My Brute, joing the 6gc.net clan!**
--A section of a kid's actual test that had been scanned-- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 2:13 PM |