6G Celicas Forums

Welcome Guest ( Log In | Register )

> Help!!!! my car will start, then die all of a sudden&#, info inside
post Nov 1, 2007 - 2:05 AM
+Quote Post
joehernandez



Enthusiast
****
Joined Aug 5, '06
From San Luis AZ
Currently Offline

Reputation: 4 (100%)




OK please i need help, i dont know what happened but,,,,,
i parked in front of my friends house, so i put the car in neutral, then i turned off, after 3 minutes, one of my friends parked next to me, so i turned the car back on while in neutral, and i started to rev it up, after that the car always stayed at 2000 revolutions, and if i stop, the car will go way to fast to 1000 then 1500,,
then i turned it off and i tried to turn it back on, but i just wont, it will almost start, but no, i doesnt;
what do i do, or did i messed up something?????

This post has been edited by joehernandez: Nov 1, 2007 - 2:18 AM


--------------------
 
Start new topic
Replies
post Nov 1, 2007 - 11:56 AM
+Quote Post
joehernandez



Enthusiast
****
Joined Aug 5, '06
From San Luis AZ
Currently Offline

Reputation: 4 (100%)




QUOTE(cHinaman727 @ Nov 1, 2007 - 10:03 AM) [snapback]610351[/snapback]

whats the weather like?

the weather is normal, not hot not cold. but i dont really think it was that,

QUOTE(Gary @ Nov 1, 2007 - 10:39 AM) [snapback]610360[/snapback]

Always check for air, fuel, and spark.
Also, does it throw any code?

what you mean with any code?

QUOTE(roelamizzle @ Nov 1, 2007 - 10:57 AM) [snapback]610363[/snapback]

could be your throttle is sticking and flooding your engine with fuel, or something electrical or some sensor has malfunctioned. While it was running did your "check engine" light come on?

Try letting it sit for a little while and spray your throttle cable linkage with some WD 40 or some other light spray lubricant. Then try and start it again.

Look, this is what we found
IPB Image
on the bottom of the steereng wheel, where the pedals are,, for some reason the accl (accelerator pedal), when i rev the car too fast, the red thing, which pulls the gas line, jumped to the back, when it had to be on the front of the blue thing. which is a small clip that the accl pedal has to so when you press the accl it will take more gas to the motor,
well, we put it back in place but the accl and gas lines were still a little bit loose, why? i don't know, it was suppose to go back to normal, i tried to turn the car on, it did started, but i just was shaking too much, and the revs were at 200 or 350 max,
i can drive the car like that but i just feels weird,


--------------------

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 12th, 2025 - 9:40 PM