Another stupid question, Climate/vent control light's Options

[94CelicaDragon]

So I got some orange Cellophane, to change the ugly green light color for the climate/vent control, and gauge's/slash other lights. And I went to take that **** out, ****, I could not figure that **** out, I took out the screw's and pulled back the tabs, and that **** would not come out. I got a slight view from behind It, and I saw another screw, "Hmm" I thought, maybe thats whats keeping It In? Nope, took It out and It still wouldnt come out, Now Im pissed off and frustrated cause I cant get done what I wanted to get done today. Please help me If you know what Im talking about. Oh yeah, I even looked In my Chilton, and It didnt say how to take It out either.

[Zimluura]

for taking the old leds out. i used a friend. holding the circuit board in one hand, and the led with pliers in the other (and gently pulling). then i touched the iron to each led leg from the other side. and the solder melts and that leg pops out (be sure to note the leds polarity before you do this).

i have a 1mb cc unit howto with tons of pictures that i made a while ago. if you want i can send it to you (give me your email in a pm). when there is an option for adding a new howto here i'll try to port it over to this site.