![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jul 1, '06 From Oregon Currently Offline Reputation: 0 (0%) ![]() |
Ok so I bought my Celi almost 2 years ago. It drove fine for about 3 - 4 months, then the brakes started squeaking. After a few weeks of this I couldn't stand it anymore, so I had them rotated. Well now the other side is squeaking, so I can't rotate again. So my question is, what is suggested for a good set of brakes? It's my only car, daily driver, and I don't really hit the track.
-------------------- - Be careful when playing leapfrog with a Unicorn -
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
they could also be squealing because they need to be replaced. get them checked out soon.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
QUOTE(lagos @ Nov 7, 2007 - 10:43 PM) [snapback]612194[/snapback] they could also be squealing because they need to be replaced. get them checked out soon. agreed, if they wear all the way down you will destroy your rotors fast. there is a "warning" system on most pads that lets you know when you need to change your brake pads.. so if you pads never squeaked before, and they are now squeaking.. it could mean you need new pads.. The brakes have a metal tab that touches the rotor when the pads wear down enough and it produces a chirping sound, therefore letting you know you need new pads. Take a look at your pads/brakes and if you see this tab against the rotor, then you need new pads. (A note about cheap autozone pads, which are sadly what i have right now.. anywho they are metallic so they squeak when breaking, where a ceramic pad usually does not make noise.) This post has been edited by jcbass7: Nov 8, 2007 - 11:31 AM |
![]() ![]() |
Lo-Fi Version | Time is now: August 27th, 2025 - 4:28 PM |