![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 13, '07 From riverside, ca Currently Offline Reputation: 0 (0%) ![]() |
I been looking through posts and stickies and i am still very confused about this. next year i am planning to do a major project on my car in which i will either swap my engine or add a GT4 front end or even both . The Gt4 front end conversion parts are posted in the stickies but still are confusing to me , can somebody that did it before tell me exactly which parts need and a simple guide of what needs to be done ? thanks everybody
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 7, '03 Currently Offline Reputation: 55 (100%) ![]() |
Stock headlights are fine there are a few mods needed to front
you will need to use a gt4 reinforcment bar and frame rail brackets or cut down your stock one which I don't recomend because it offers no support to the center section of the bumper cover. The hood safety catch will need to be extended about 1 1/4 to 1 1/2 inches also or use a lhd gt4 latch. search around a bit and you will find there are several topics on the conversion. ![]() The price you stated is quite low most cost around 1400. not including latch and rebar. This post has been edited by 97lestyousay: Nov 9, 2007 - 7:18 PM -------------------- JDM guy made me do it.
|
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2025 - 6:55 PM |