![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jun 13, '07 From Whitby, ON, CAN Currently Offline Reputation: 6 (100%) ![]() |
I took apart my front suspension after installing it a week ago and having alot of noise. I did as Playr158 said and greased the top of the spring and bearing. Also made sure the OUT was actually facing out this time. I re-installed, sprayed all rubber components with silicone spray 1 whole can. Ta-da No more noise. Im more then happy with this now. Tein and KYB's No Sound whatsoever. I highly recommend greasing and silicone spraying all busings and other components if you think you have put enough on, then put a little more.
Thanks for the advice guys. Im glad there was no problem with anything important and it was just my lack of knowledge on the install! oh yea whoever told plyr to just keep re-installing it again and again untill no sound and not to grease. No Dice, i tried that came up with same problem. Grease and silicone spray FTW!!! This post has been edited by 94celigts: Nov 9, 2007 - 8:47 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%) ![]() |
no canadian tire here. I guess any auto parts store should have them. 3.99 is cheap. I'll try it tomorrow lets hope this works.
-------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
![]() ![]() |
Lo-Fi Version | Time is now: July 29th, 2025 - 10:59 AM |