Woot No Popping/Creaking Anymore!!, Thank you playr158 and others!! Options

[94celigts]

I took apart my front suspension after installing it a week ago and having alot of noise. I did as Playr158 said and greased the top of the spring and bearing. Also made sure the OUT was actually facing out this time. I re-installed, sprayed all rubber components with silicone spray 1 whole can. Ta-da No more noise. Im more then happy with this now. Tein and KYB's No Sound whatsoever. I highly recommend greasing and silicone spraying all busings and other components if you think you have put enough on, then put a little more.

Thanks for the advice guys. Im glad there was no problem with anything important and it was just my lack of knowledge on the install!

oh yea whoever told plyr to just keep re-installing it again and again untill no sound and not to grease.
No Dice, i tried that came up with same problem.

Grease and silicone spray FTW!!!

This post has been edited by 94celigts: Nov 9, 2007 - 8:47 PM

[Valo666]

how rusty where the bolts on your car dana? I gotta rip apart my suspension probably in the next week or 2, but the bolts and cams and every thing on my car are stupid rusty.

EDIT: what kinda grease did you use?..just the generic crappy tire suspension grease??

This post has been edited by Valo666: Nov 10, 2007 - 3:07 PM