Question on electical......please help!!!! Options

[dabazied]

Well as I've posted before, my dash lights don't work on my car so I have one of those ghetto rigged cig lighter plug accent lights to see it or just use my cell phone for light. When i say the dash lights don't work, I mean the ones that light up the gagues, all blinker, check engine, low gas, air bag and all other lights work on the dash. Also the lights that are supposed to come on as a "backlight" on my temp control(for heat and ac) doesn't come on, but when I press the buttons, those light up. This all started happening when someone put in a new cd player a while back. I was trying to clean up some wires so the interior wouldn't look so ghetto and found that a couple wires seemed loose. I looked under the hood and found these:

http://i154.photobucket.com/albums/s245/da...ed/DSCF0345.jpg

http://i154.photobucket.com/albums/s245/da...ed/DSCF0346.jpg

Now, I know that the orange one should be hooked to the positive terminal since it has the little fuse connected to the wire, but I'm not sure about the green one and dont wanna mess anything up. Should the green one go to neg or pos?

Thanks for the help guys

*Editing was to fix the links to the pics*

This post has been edited by dabazied: Nov 11, 2007 - 1:30 PM

[dabazied]

Yeah, my headlights work.... Btw, I was curious and followed those wires. I have had this switch under my steering wheel and didn't know what it went to, funny enough the wires went back to that switch so obviously there used to be fog lights on my car at one point probably lol....... anyways, I've never done any electical work but i'm not paying $1500 to toyota for it like they quoted me lol...... so, when I use the multimeter, what am i testing? is it the group of wiring thats on the side panel behind the kickpanel fuse box or where should I start? thanks so much btw