![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) ![]() |
So, i bought my self a Apexi AFC Neo today, and am plannin on wiring it up on tuesday when i have class. Has any one wired one of these up to a 5s yet?? I know Steph got one wired up to her ST, but not 100$ sure about any one with a GT. i donno if its like the SACFII, but its got a 15 wire wiring harness, but it says for a non v-tec, non RB26DETT, and a non- karman sensor vehicle, only use 9 of the wires. So pretty much you only need these wires: IG power, IG power *again*, RPM, throttel, ground, ground, airflow/pressure sensor, airflow/pressure sensor and illumination *ie power*. Does any one have a pic of a 5S pinout that can highlight these wires for me? Thanks
Bryan |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
on the middle ecu plug, pin 2 from the right when looking at the plug connected to the ecu. should be gray with black stripe.
you can also look at the wires right on your map sensor, in the engine bay. you should have a brown wire ( ground ), gray with black stripe (signal for safc) and red (5v from the ecu). -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() ![]() |
Lo-Fi Version | Time is now: August 5th, 2025 - 9:54 AM |