6G Celicas Forums

Welcome Guest ( Log In | Register )

> prototype sway bar links, custom sway bar end links
post Sep 23, 2003 - 11:35 AM
+Quote Post
97GTinKC

Enthusiast
***
Joined Aug 31, '02
From KC
Currently Offline

Reputation: 0 (0%)




http://us.f2.yahoofs.com/users/81f6d5b0_m4...h2w_ICBgXOT26H0

Got my prototype end links done, installed the right side only to see how/if I notice any difference or problems, I will bring them to the KC celica meet next Sat...



Bad news is I haven't found a reasonable supplier, still going to be around $150 /pair. (but that is better than the 1st supplier, they wanted approx $75 PER END = 600/car? )


Had them on a year, still tight,,, still too expensive,,,

This post has been edited by 97GTinKC: Mar 1, 2005 - 12:07 AM
 
Start new topic
Replies
post Sep 24, 2003 - 2:19 AM
+Quote Post
97GTinKC

Enthusiast
***
Joined Aug 31, '02
From KC
Currently Offline

Reputation: 0 (0%)




QUOTE
why so expensive??? you should be able to get rod ends cheap. Whos your supplier?


The expensive ones were Hirschman, $75 got stainless with weather seals and 10mm studs mounted in the joints. price doubled to get the studs, I'll use bolts. The ones I got were from an FK supplier, less than 1/2. the FK are also stainless, have to buy 50 of each to get a decent price break. Plus they need to be shortened for the front. only 60mm center-center. And yes, everyone has American threaded SAE and USS threaded ones very reasonable...metric are hard to find.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 27th, 2025 - 1:00 AM