Bremo Brakes..on 6g Options

[lubu]

I found these on eBay, but are they bolt-on or do I need to modify them to fit...btw does the price sounds right??

bremo 1

bremo 2

This post has been edited by lubu: Nov 14, 2007 - 2:45 AM

[Kadett]

@azian_advanced:

Those links and specs are designed for a ST185. SveNRG (fellow Dutch 6th Gen owner) had ST185 discs/and calipers on his AT200. And those were grind down.So if a ST185 owner needs to grind down the ST205 discs to 297mm, a ST202/ST204/AT200 owner would need to grind the 205 discs down about 1-1.5cm further then 297mm.

And for the rears:

They will never fit unless you remove the handbrake assembly, even then I dont know if its bolt on. The ST/GT handbrake assembly (handbrakepads etc etc) is larger then that of a ST205. Difference is about 2 cm's in diameter.

This post has been edited by Kadett: Nov 19, 2007 - 9:50 AM