 Allen Key |
 Nov 20, 2007 - 7:55 PM
|
 
|
|
Enthusiast  Joined Nov 17, '07 Currently Offline Reputation: 0 (0%)  |
I was about to remove the rear suspension when i noticed the hole with the allen key on the sway bar was rusted, i put the allen key in it and it didnt catch... is there a way to remove the nut or am i screwed
|
 |
Replies
|
Nov 22, 2007 - 12:02 AM
|
|
 Enthusiast Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) |
if you had that much trouble, just heat the crap out of it...like when i did the front ones on the coupe, i dont think they were ever changed. I had heat on each bolt for about 3 or 4 min, then quenched it really quickly to distort the metal a bit, smacked it with a hammer on the nut, and it came off easily. I also used PB Blaster
|
Posts in this topic
Celicam8 Allen Key Nov 20, 2007 - 7:55 PM
bccentaur3 you are some what screwed. Its going to be a B*tch... Nov 20, 2007 - 8:02 PM Celicam8 Im using a clamp wrench, and as far as turning it,... Nov 20, 2007 - 8:12 PM bccentaur3 You might as well. You can actually go to any auto... Nov 20, 2007 - 8:30 PM Valo666 use a set of vice grips on the rubber boot, pretty... Nov 20, 2007 - 8:55 PM Celicam8 thanks valo...
bccentaur3, i went to AutoZone and... Nov 20, 2007 - 9:01 PM bccentaur3 Well there are numbers of members from here who us... Nov 20, 2007 - 9:18 PM Celicam8 stiffer in what sense? does the car feel harder wh... Nov 20, 2007 - 9:30 PM bccentaur3 The st185 is the 5th gen gtfour or alltrac Nov 20, 2007 - 9:36 PM Celicam8 do you by any chance have a link to where i can bu... Nov 20, 2007 - 9:39 PM bccentaur3 5th gen years 90-93. I forgot the link search on h... Nov 20, 2007 - 11:52 PM bccentaur3 link for the endlinks
http://www.twosrus.com/cata... Nov 20, 2007 - 11:57 PM Celicam8 I read the 6gc endlinks one, the endlinks that are... Nov 21, 2007 - 12:00 AM azian_advanced the "U" one you're referring to are ... Nov 21, 2007 - 1:27 AM
Celicam8 QUOTE(azian_advanced @ Nov 21, 2007 - 1... Nov 21, 2007 - 1:43 AM illneversellmycelli im lucky i was trying to take those off a parts ca... Nov 21, 2007 - 1:34 AM Celicam8 I finally got the endlink off... took almost 2 hrs... Nov 21, 2007 - 12:54 PM bccentaur3 QUOTE(Celicam8 @ Nov 21, 2007 - 11:5... Nov 21, 2007 - 2:39 PM LewFX just dont drive it without the endlinks, you will ... Nov 21, 2007 - 1:06 PM Celicam8 i dont really want to drive it, just lower and mov... Nov 21, 2007 - 1:18 PM azian_advanced i'm sure you can... if you have some wire then... Nov 21, 2007 - 1:43 PM Celicam8 lol... you guys don't sound convincing... ^^ Nov 21, 2007 - 1:50 PM Celicam8 i dunno... whenever i get around to order em... in... Nov 21, 2007 - 2:41 PM Valo666 most new style endlinks now dont have the allen ke... Nov 21, 2007 - 2:57 PM Celicam8 thanks Valo, I read the topic about endlinks, and ... Nov 21, 2007 - 2:59 PM Celicam8 holy ****, i cant get those damn nuts off the susp... Nov 21, 2007 - 4:45 PM njccmd2002 wd 40 and let it soak for a couple of hours, be pa... Nov 21, 2007 - 6:13 PM Celicam8 I removed the damn endlink took 2 hrs, the 2 nuts ... Nov 21, 2007 - 7:18 PM njccmd2002 15 bucks at advance auto parts. , it sure di... Nov 21, 2007 - 10:10 PM Celicam8 for now i dont see any other big projects like thi... Nov 21, 2007 - 10:25 PM Celicam8 lol i heated it for about 10 min a few times, spra... Nov 22, 2007 - 12:38 AM Batman722 haha you should of done this and been done with al... Nov 22, 2007 - 12:48 AM Celicam8 i did do it that way, and i did read the stickies,... Nov 22, 2007 - 1:02 AM azian_advanced taking the two strut bolts are so fun, especially ... Nov 22, 2007 - 1:30 AM Celicam8 my pipe bent ^^ i bent 2 3 foot poles... and i was... Nov 22, 2007 - 2:19 AM azian_advanced then you should probably find a stronger and longe... Nov 22, 2007 - 11:02 AM Celicam8 yea i know, so far did 3 of the 4 wheels, and havn... Nov 22, 2007 - 11:55 AM bccentaur3 QUOTE(Celicam8 @ Nov 22, 2007 - 10:5... Nov 23, 2007 - 8:37 PM Celicam8 IM DONE! Nov 23, 2007 - 5:47 PM Celicam8 I dont have endlinks yet... i had 5guage single st... Nov 23, 2007 - 9:03 PM Celicam8 hey centaur i ordered the sway bar links they wil... Nov 27, 2007 - 10:29 PM bccentaur3 DANG finally. Its taking such a long time. Well si... Nov 28, 2007 - 11:33 AM Celicam8 i dont celebrate thanksgiving... i didnt have enou... Nov 28, 2007 - 12:26 PM Celicam8 btw, it seems like a stiffer ride than stock... th... Nov 29, 2007 - 12:58 AM bccentaur3 you lowered the car too right?? if so then of cour... Nov 29, 2007 - 1:13 AM Celicam8 yea, 1,5" but it seems... stiffer than should... Nov 29, 2007 - 1:32 AM bccentaur3 WHAT???? Your steering wheel is shaking at idle? w... Nov 29, 2007 - 1:35 AM Celicam8 i didn't do ****.... its weird... never done t... Nov 29, 2007 - 9:32 AM Celicam8 I JUST GOT THE LINKS!!
wow, that was a qui... Nov 29, 2007 - 12:43 PM bccentaur3 So hows the celi riding now? Nov 29, 2007 - 6:26 PM Celicam8 fu*king awsome... doesn't feel like a celica a... Nov 29, 2007 - 6:43 PM bccentaur3 Nice you have the right thought in mind. I am doin... Nov 29, 2007 - 11:01 PM Celicam8 same here, but im looking at the positive, its goi... Nov 30, 2007 - 1:40 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: May 27th, 2025 - 3:57 PM |