![]() |
![]() |
![]() |
|
Enthusiast Joined Nov 4, '07 From utah Currently Offline Reputation: 0 (0%) ![]() |
Ok so me and mah pops have taken apart most of the car but we got some questions cause the repair manual is not being specific enough.
We're trying to replace the clutch cause the clutch went out. Its a 95 GT. Did anybody have to remove the exaust and the arms on the passenger side? How much did you take apart on it? -------------------- sig removed for size and content.
|
![]() |
![]() |
|
Enthusiast Joined Nov 4, '07 From utah Currently Offline Reputation: 0 (0%) ![]() |
Ok we got everything it seems except the CV joint cup on the drivers side will not come out. We got the arm but the cup is still there and we can't get the trannie off without it. My dads friend is a mechanic and says its just supposed to pop out. We've tried lightly hammering it and prying it but we don't want to break it. We also tried hand pulling it. Any ideas?
-------------------- sig removed for size and content.
|
![]() |
|
Enthusiast Joined Nov 4, '07 From utah Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(recniabsal @ Nov 23, 2007 - 7:27 PM) [snapback]616993[/snapback] Ok we got everything it seems except the CV joint cup on the drivers side will not come out. We got the arm but the cup is still there and we can't get the trannie off without it. My dads friend is a mechanic and says its just supposed to pop out. We've tried lightly hammering it and prying it but we don't want to break it. We also tried hand pulling it. Any ideas? Drive shaft not arm. Sorry about that. If the cup comes off will we be able to get the transaxle off without having to pull the suspension cross member? -------------------- sig removed for size and content.
|
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 4:43 PM |