![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Nov 17, '07 Currently Offline Reputation: 0 (0%) ![]() |
I was about to remove the rear suspension when i noticed the hole with the allen key on the sway bar was rusted, i put the allen key in it and it didnt catch... is there a way to remove the nut or am i screwed
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Nov 17, '07 Currently Offline Reputation: 0 (0%) ![]() |
I dont have endlinks yet... i had 5guage single stranded wire i used to attach it.. just wanted to make sure no noise....
and I almost broke my ratchet as i was finishing unscrewing, it started skipping, isnt busted yet... i used my tire iron to tighten the bolts... and i forgot that little ring the first time (one that goes under the nut that screws in the strut) and i removed the one on the passanger side because i thought it would be better... what a mistake... had to remove everything and remove the nuts (took about 30 min... melted the plastic on the ring, took clams and clamped a cloth thing to the strut so it stays and doesnt turn... anyways ![]() BTW... IM F**king tired!!!! =) it was fun though, and I think I learned a way to replace the boot breaks with roters. I'll try to get some breaks ![]() 7th generation ones work... correct? This post has been edited by Celicam8: Nov 23, 2007 - 9:48 PM |
![]() ![]() |
Lo-Fi Version | Time is now: May 28th, 2025 - 6:20 AM |