![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 14, '03 From Jacksonville, FL Currently Offline Reputation: 2 (100%) ![]() |
Hey, this is Jen's friend, lOVeYdUbb..
We were doing a compression test on her 5S-FE and we got the compression tester stuck in there. So now there's a hose sticking out of the spark plug well and now we don't know what to do. I've googled and on a Honda forum, it said use penetrating lube a try to remove it. I was wondering if it is safe to use the PB Blaster in the spark plug well or should I just stick to WD-40. If that doesn't work than we have to pull the head and unscrew from there ![]() -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) ![]() |
I googled your problem and found someone else on a Honda forum that had the exact same thing happen. Here's the link to the thread, it's got LOTS of suggestions:
http://www.honda-tech.com/zerothread/2160842 This is a link with tips on how to avoid this in the future, some very good ideas http://www.dsmtalk.com/forums/archive/index.php/t-97471.html This post has been edited by GriffGirl: Nov 30, 2007 - 12:35 PM -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: September 12th, 2025 - 7:55 PM |