 What are the Requirments for changing my struts, New KYB's and S-Techs in the mail |
 Dec 6, 2007 - 10:32 PM
|
 
|
 Enthusiast  Joined Jun 5, '07 From Santa Maria Currently Offline Reputation: 1 (100%)  |
Ok, so I have been wanting to change my suspension ever since I got my car and the time is finally coming. I just purchased and received some KYB GR-2's and my teins are in the mail. I just had a couple of questions on what is needed for the install.
1.) Can I use the orignal stock mounts that are at the top of the strut? (I'm refering to the piece that holds the spring on from the top end) 2.) I noticed that someone else recently did an install of the same set up and he used what appeared to be a rubber piece on the strut. Right where the spring would sit on the strut (bottom of strut), are these necessary? 3.) How hard are these bolts going to be to get off? 4.) Is there a certain way you need to place the spring onto the strut? Or can you just slap it on there? --------------------  |
 |
Replies
|
Dec 6, 2007 - 10:45 PM
|
|
 Enthusiast Joined Apr 12, '07 From Houston, TX Currently Offline Reputation: 4 (100%) |
1. Yes
2. Yes 3. Not very, buy you'll need to use some muscle 4. There's a groove in the bottom of the piece from question 2 that the end of the coil sits in -------------------- "He won't come out of the bathroom. He keeps telling us we're dark somethings and not his friends."
"Hmm. Ask him if he's the dragon reborn." "What?" "Just do it." ".......He said yes." "Tell him you are not darklings. He should open up." ".......Sweet. Thanks." "No problem." |
Posts in this topic
k-weaver What are the Requirments for changing my struts Dec 6, 2007 - 10:32 PM
Galcobar 1) Possibly (depends on condition, strut mounts ca... Dec 7, 2007 - 12:12 AM 94celigts grease(alot of grease) all bearings in top mount, ... Dec 11, 2007 - 2:31 PM Celicam8 when i was replacing my junk, i found my wheel tie... Dec 11, 2007 - 11:05 PM njccmd2002 QUOTE(k-weaver @ Dec 6, 2007 - 10... Dec 12, 2007 - 9:17 PM 94celigts You dont need insulator new, nor strut bumper... t... Dec 13, 2007 - 2:32 PM
Celicam8 QUOTE(94celigts @ Dec 13, 2007 - 2:3... Dec 13, 2007 - 5:48 PM 6strngs does the new bumper need to be cut when installing... Dec 13, 2007 - 4:25 PM 94celigts Top nut should come with KYB's. I ordered new ... Dec 13, 2007 - 4:42 PM njccmd2002 its true you dont need new insulators, or strut bu... Dec 13, 2007 - 10:34 PM aggieanton Where can I pick up a set of bumpers/ insulators? ... Dec 18, 2007 - 5:00 PM Celicam8 autozone will have it, or order online best way to... Dec 18, 2007 - 8:16 PM k-weaver I actually used my stock bumpers, they seemed to b... Dec 18, 2007 - 10:53 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 24th, 2025 - 10:11 AM |