Underbody LED's?, questions.. Options

[cnelson]

Hey anybody every install under body LED's or neon? Where'd you run the wires and what power source did you connect it to? Also The little ashtray on the back of the center console i want to throw two switches in there, one for my interor lights and one for the under body. Anyone have any thoughts on how to get wire back there?
Thanks. -cnelson.

[stetsonaw]

if i got a set of underbody leds, i would get the ones that are remote controlled, so that i wouldn't have to worry about running switches, but if i were to do switches, i would run the wire from the control/distribution box that comes with the tubes, mount it in the engine bay somewhere, run the switch wiring thru the existing hole in the firewall, run the wires under the center console and into the ashtray. now as for going under the console, you'll probably have to remove a few screws to get the wires exactly where you want, but shouldn't be too difficult. for power source, use a 20amp fuse between the control box and the battery. don't tap into anything, just directly connect to the battery. there should be instructions when you buy the kit. ledunderbody.com has some good kits.