Polk subs and kicker amp, wat yall think of this setup? Options

[CelicaST_CALI]

Well i thought id make my own custom box but now im thinking not,what do u guys think of these,there reviews are great,but id need to get a big amp to power them.Concerns,questions,comments?


http://www.crutchfield.com/App/Product/Ite...2122&tp=112

Details:

*ported enclosure with two 12" db Series subwoofers
*3/4" MDF construction with front-panel ABS trim
* polypropylene woofers with Santoprene rubber surrounds
* 2-ohm mono impedance (1 set of heavy-duty binding posts)
* Power Port venting technology
* frequency response: 27-200 Hz
* power handling: 750 watts RMS (1,500 watts peak power)<<<<<<<<<<<
* sensitivity: 103 dB
* 34-1/4"W x 16-1/4"H x 17-1/4"D1 x 13-1/4"D2
* warranty: 1 year

+


http://www.crutchfield.com/App/Product/Ite...7501&tp=115

# mono subwoofer amplifier
# 375 watts RMS x 1 at 4 ohms (750 watts x 1 at 2 ohms)
# variable low-pass filter (50-200 Hz at 24 dB per octave)
# variable bass boost (0-18 dB at 40 Hz)
# subsonic filter (12 dB at 25 Hz)
# wired remote bass level control
# Class D design
# CEA-2006 compliant
# speaker-level inputs
# preamp outputs
# fuse rating: 40A x 2
# 4-gauge power and ground leads with 80-amp fuse recommended — wiring and hardware not included with amplifier
# 14-11/16"W x 2-5/16"H x 9-5/8"D
# warranty: 2 years

This post has been edited by CelicaST_CALI: Nov 12, 2007 - 10:23 PM

[Culpable04]

I have a ZX kicker amp, but mine is 400 watts, the amp is built really good, comes with remote bass controler, so you can quickly adjust the bass depending on the music you're listening by just turning to knob instead of going thru the radio equalizer. My ZX amp is powering the Kicker subs I showed you before, and yes I know is only 200 watts peak power but they can make my rear view mirror to shake, so that's more than what I was expecting from them. the ZX amo is an excellent amp. I read the whole thread and I think you're waiting for some feedback about the amp. The only thign is, this amp is not 1 Ohm stable, but I'm sure you knew that.