 3s-gte dead... need advice rebuilding, any advice will help |
 Dec 15, 2007 - 3:20 PM
|
 
|
 Enthusiast  Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%)  |
alright guys so after a huge deal with my valve cover leaking and all kinds of trouble... it turns out that when i took my oil pan off to inspect everything... i found a piston rod end cap just hanging out in there with the two bolts as well.... so my number two piston is shot i believe and who knows about the other pistons or the crank for that matter.... so the whole engine is getting pulled out as we speak and torn down... currently i have forged pistons but i need to know what all i should do while i'm tearing this thing down...all the seals and gaskets were just replaced (within 200 miles) and the valves cleaned up and redone... so i would rather not take the valves apart... thanks a lot... check my profile for the specs of the engine (i'm just thankful that my $1500 turbo is still in good condition... i think)
-------------------- Breaking Axles...
|
 |
Replies
|
Dec 17, 2007 - 6:19 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
go buy a brand new oem short block from toyota. its 1500 bucks and you get a 1yr warranty.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Posts in this topic
pittfirefighter 3s-gte dead... need advice rebuilding Dec 15, 2007 - 3:20 PM
pittfirefighter BUMP! Dec 17, 2007 - 6:11 PM pittfirefighter well here's what i'm thinking.... my buddy... Dec 17, 2007 - 6:30 PM lagos that motors been rebuilt before. chances are that ... Dec 17, 2007 - 7:01 PM
celicast3sgte take the whole thing apart. check the walls, have ... Dec 18, 2007 - 11:13 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 3rd, 2025 - 11:17 AM |