Sep 29, 2003 - 9:12 PM
|
|
|
Enthusiast ![]() ![]() Joined Feb 9, '03 From Sioux falls, South Dakota Currently Offline Reputation: 1 (100%) |
if any none is from notheast nebraska or southeast south dakota. i went to the toyota dealership just to check the price to have them installed and they wanted 420 so i went to another shop and they wanted 450 i was wondering if anyone knew of a cheaper place of maybe this is a good price. they are dropzones if that matters. thanks guys if this is a stupid question just dont answer
-------------------- ![]() |
![]() |
Sep 30, 2003 - 1:46 PM
|
|
|
Enthusiast ![]() ![]() Joined Apr 28, '03 Currently Offline Reputation: 0 (0%) |
It's not so hard, just gotta make sure to line everything up correctly. Specifically the top spring perches in the rear (you'll see how it lines up in the chassis) and the arrow on the top spring perch in the front (the arrow needs to line up with the steering knuckle bracket on the strut itself. Also, tighten up the upper strut mounting bolts when the car is back on the ground. That way the full weight of the car can be on the springs b4 you tighten it. And of course get it aligned as soon as you get done, that's prolly the most important of all.
|
afroman orderd springs where to get them installed Sep 29, 2003 - 9:12 PM
Kwanza Do it yourself. It's fairly easy...refer to t... Sep 29, 2003 - 10:17 PM
afroman i have read through it but in all honesty i would ... Sep 29, 2003 - 10:30 PM
Kwanza Well.. 400 is a lot of money... I mean, a lot. I ... Sep 29, 2003 - 10:45 PM
afroman thanks man i will read through it again and see if... Sep 29, 2003 - 10:50 PM
FallenHero take it to a back woods garage. They'll do it... Sep 29, 2003 - 11:01 PM
afroman well i think that i am going to tackle this projec... Sep 30, 2003 - 2:52 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 9th, 2025 - 12:35 PM |