 4AGZE forged pistons in a 7AFE...., fitting... |
 Aug 31, 2003 - 10:56 AM
|
 
|
 Enthusiast  Joined Dec 21, '02 From Italy Currently Offline Reputation: 0 (0%)  |
Hi, I found 4 pistons in perfect shape out from a 1991 AE92 4AGZE engine.
I heard many times that the 4AGZE pistons fit the 7AFE (the bore is the same). my questions are: will I need little mods to the upper rod hole to fit the pistons? the CR rated for those pistons is 8.9:1....now...with the 7AFE head, will this CR be the same? Thanks to all! |
 |
Replies
|
Oct 1, 2003 - 1:08 PM
|
|
 Enthusiast Joined Aug 29, '02 From Dallas, Tx Currently Offline Reputation: 0 (0%) |
You're probably going to have to check with a machine shop to be sure. If you take all your parts to them they would be able to tell you. The pistons may not work if the wristpin hole is in a different location than the 7a pistons. Assuming the wrist pin is in the same location and you're using a stock 7a head gasket then yes, you will have the benefit of the lower compression ratio given by the gze pistons.
Forged pistons do expand more than cast pistons therefore they have to run larger piston to cylinder clearances and they should be warmed up before running hard. |
Posts in this topic
edo17982 4AGZE forged pistons in a 7AFE.... Aug 31, 2003 - 10:56 AM
doGGy Edo, you are one lucky mot******* How did you fin... Sep 1, 2003 - 1:52 AM FallenHero there were some on e-bay for like $50 a while... Sep 1, 2003 - 2:08 AM edo17982 eheh
Anyway....anyone has answer to my quests??... Sep 1, 2003 - 4:35 AM Hanyo what car did that come out of? Sep 1, 2003 - 4:46 AM doGGy QUOTE (Hanyo @ Sep 1, 2003 - 2:46 AM) what car did... Sep 1, 2003 - 5:15 AM edo17982 out from a 1991 AE91 Levin Sep 1, 2003 - 5:41 AM DustyBurns30 the stock c/r on a 7a-fe is 9.5-1 if your planning... Sep 2, 2003 - 10:56 PM Hanyo what are the cons of forged pistons? Sep 3, 2003 - 4:46 AM BlackSTX I've heard that with some forged pistons you w... Sep 3, 2003 - 10:21 AM edo17982 There is someone who know if the CR of 8.9:1 of 4A... Oct 1, 2003 - 5:15 AM edo17982 Thx!!
does anyone know which is the wri... Oct 5, 2003 - 4:52 AM latinc-li-k What about a throttle bodie from a 4age engine wil... Oct 6, 2003 - 10:25 AM
edo17982 Even better would be quad throttle bodies!... Oct 6, 2003 - 11:26 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 13th, 2026 - 9:12 AM |