6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3sgte halftrac clutch question
post Jan 10, 2008 - 8:13 PM
+Quote Post
02bluerolla

Enthusiast
***
Joined Aug 31, '05
From Houston TX
Currently Offline

Reputation: 7 (100%)




hey waz up guys.. well there selling me a clutch kit for a halftrac ( bascillayis a 91 celica with a 91 gt tranny with a 2nd gen 3sgte) well my question is will i be able to use the clutch in my 94 gt tranny and 2nd gen 3sgte engine.


--------------------
 
Start new topic
Replies
post Jan 12, 2008 - 6:22 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




QUOTE(808celica @ Jan 12, 2008 - 3:55 AM) [snapback]630202[/snapback]

QUOTE(presure2 @ Jan 11, 2008 - 2:06 PM) [snapback]630115[/snapback]

act, spec, or any of the clutch comapanys should be able to make you the clutch setup you'll need.
it will be a 3sgte pressure plate, and 3sgte clutch disk, with the s54 spline.


doesnt the ACT clutch tear up the 5sfe tranny??? from what i heard.


Its not about one brand being good or bad. ACT, Spec, Clutch Masters, Centerforce, etc...etc... etc... all sell different types of clutches. Some are more aggressive then others and some even have problems. If you google almost any brand, you'll find a forum full of people who have something bad to say about almost every clutch brand out there.

Act sells a very mild street disk, and they also sell some very heavy duty puck clutches. So you cant just say that all Act clutches are good/bad.

This post has been edited by lagos: Jan 12, 2008 - 6:22 PM


--------------------
15PSI - 30MPG - Megasquirt Tuned

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 12th, 2025 - 9:04 PM