![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Oct 25, '07 From Eagan, MN Currently Offline Reputation: 3 (100%) ![]() |
I recently bought a set of white LED's (194) for my gauge cluster and ever since I had them working perfectly and evenly, one has dimmed itself down and now the tachometer light is flickering constantly. The weird thing about it is that if you look close enough, you can that the numbers look like they're partially covered by something.
They used to look like this: (without the red needles) ![]() Now they look like this: ![]() Any ideas? I was suggested to check the current, grounds, and alternator. But I doubt that is the cause or else the first thing to lose power would be my radio and other instrument lights. Please help! -------------------- -Tyler
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 7, '06 From wyomissing pennsylvania Currently Offline Reputation: 2 (100%) ![]() |
if they are the 5 matrix ones or whatnot, you possibly could of bumped the dimmer or something and caused a few of them to burn out, so now only say 1 or 2 of the 5 leds in each one is lit causing it to be dim
-------------------- you know why they put sheep at the edge of a cliff.... that way they push back!
![]() ![]() ![]() ![]() (2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss (2:28:08 AM) edit: that did the trick |
![]() ![]() |
Lo-Fi Version | Time is now: June 11th, 2025 - 10:24 PM |