Opinions on this set up Options

[Celicav]

I'm going to be working on my engine performance now, and just want your opinion on the BALANCE of this set up. Simple, but still appreciate opinions from the pros.

Intake:

SRI or CAI
Web Cams (possibly get them done to same specs by local machine shop)
(Then probably get Air/Fuel ratio tuned)

Exhaust:

2.25 Catback done at shop (want to keep it legal)
2.25 Street Series Magnaflow 5X8 Oval

Ignition:
Anything need to be enhanced here? I'm thinking no.

Thanks. And do you think a local machine shop would do custom cams to the Web Cam specs or quality?

[Kwanza26]

I'm going to be working on my engine performance now, and just want your opinion on the BALANCE of this set up. Simple, but still appreciate opinions from the pros.

Intake:

SRI or CAI
Web Cams (possibly get them done to same specs by local machine shop)
(Then probably get Air/Fuel ratio tuned)

Exhaust:

2.25 Catback done at shop (want to keep it legal)
2.25 Street Series Magnaflow 5X8 Oval

Thanks. And do you think a local machine shop would do custom cams to the Web Cam specs or quality?

Camshafts are very specialized parts and most local shops do NOT do regrinds because it requires specialized tools/machines. That said, an engine is an engine... tuning is done almost the same way for every internal combustion 4 stroke motor. As for your list, I personally would also add basic weight reduction mods, which IMO, bring out more life in a motor than anything an intake or exhaust could do. Light flywheel (see dr. tweak)!