greddy emanage ultimate Options

[1994toyotaracer]

hey guys i see everyone has came to the conclusion that the greddy emanage ultimate is the way to go i just have some questions like
1 whats the big difference between the enanage and emanage ultimate
2 does anyone have a write up on how to install and wire
3 what harnesses do you need for it like igntition injector etc
4 does anyone have basic tunning settings
and 5 where is the cheapest place to get one


thanks

[presure2]

hey guys i see everyone has came to the conclusion that the greddy emanage ultimate is the way to go i just have some questions like
1 whats the big difference between the enanage and emanage ultimate

you can control the injectors independantly of airflow. in other words, the emanage "blue" controls fuel much in the same manner as the SAFC, by manipulating the MAP signal. the "ultimate" can do this, and also control the injector outputs from the ECU, and modify the opening time of the injectors, without changing the MAP signal
2 does anyone have a write up on how to install and wire

i made a "cheat sheet" a while back, when i got mine, but there are options on setting it up ect that will require your own work.
i have yet to get the ignition side of it working properly with my car.

3 what harnesses do you need for it like igntition injector etc
i got the coplete harness.
4 does anyone have basic tunning settings
you need to set it up based on what features you are going to use, then you need to tune your car with a wideband, preferably on a dyno. using someone elses "settings" is not a good idea, every engine is a bit diffrent.
and 5 where is the cheapest place to get one
youll have to shop around for that, remember, sometimes the cheapest isnt the best.


thanks