Need help with ID'ing Horn wires, What color wires in the stearing column? Options

[DEATH]

Does anybody know what color wires are the horn wires in the steering column? Specifically the (+) that actually runs to the horn and powers it?

[DEATH]

Thanks guys. The green wire shows constant voltage tho so that is (+) in to the switch [and every other control on the steering column] and IDK if it's cause it's swapped but I can not find the green with red wire the Chilton's manual says it should be. I did find a red with green stripe but it shows constant 12v too so that can't be it.
Does anyone know for sure if the wiring diagram says g/r would that def be a green wire with red stripe or could it also be a red wire with green stripe?
Also can I power the horn without the relay or should I really be looking for the wire after the #1 fuse panel under the hood where the relay is?
This was an early swap so the wiring is barely functional and almost none of the accessories worked when I got her. I rebuilt the engine and for the last month or so I've just been going over every bolt and wire trying to make her as stock as poss. After that, and I'm sure she runs right, then I'll worry about cranking the boost up to stock [want to upgrade the engine safety stuff first - wideband o2, EGT, Oil Pressure, new knock sensor etc.] I want this car to be treated like she deserves.