7AFTE, Check out page 3, one last question before the car goes to the shop Options

[mikecelica]

Few questions i had about the 7AFTE setup:

1. Is a .45 trim t3 turbo ok size or too small? Lookng to make about 180hp or so
2. Is 3" exhaust too big, shud I go with 2 1/2?
3. Do i need an fmu if im gona use bigger injectors?

thanks for any help

This post has been edited by mikecelica: Feb 24, 2008 - 2:35 PM

[pabel89]

you dont need an fmu if using bigger injectors i told you that, also fmu are reliable you cant just run over 7psi or you mess up your rings. nik accomplish 170hp at 9.5psi which i think its real good, but to get the most power out of your turbo set up use bigger injectors. keep in mind thats $400 more if your using bigger injectors because your going to have it get tuned, just telling you if your in a budget.or the same thing that happen to me will happen to you your going to start choking on fuel.