 7AFTE, Check out page 3, one last question before the car goes to the shop |
 Feb 12, 2008 - 11:20 PM
|
 
|
 Enthusiast  Joined Jan 31, '07 From Ontario, Canada Currently Offline Reputation: 1 (100%)  |
Few questions i had about the 7AFTE setup:
1. Is a .45 trim t3 turbo ok size or too small? Lookng to make about 180hp or so 2. Is 3" exhaust too big, shud I go with 2 1/2? 3. Do i need an fmu if im gona use bigger injectors? thanks for any help This post has been edited by mikecelica: Feb 24, 2008 - 2:35 PM |
 |
Replies
|
Feb 15, 2008 - 9:12 PM
|
|
 Enthusiast Joined Jan 9, '05 From green springs ohio Currently Offline Reputation: 1 (100%) |
the only reason i am did the rings and bearings is i have the motor up & out getting the head done to help with flow, and i had a set of bearing made for me in japan when i was there for work. now i should not worry about the bottom , as far as that goes, still cant put to much on the stock rods and pistons.
--------------------  |
Posts in this topic
mikecelica 7AFTE Feb 12, 2008 - 11:20 PM
bccentaur3 That turbo size would be good for 180. I know its ... Feb 12, 2008 - 11:30 PM mikecelica i got an safc2, so i shud go with 2.5" exhaus... Feb 13, 2008 - 12:06 AM Celiracer18 go with 2.5" its best for a 7afte
plugs i th... Feb 13, 2008 - 1:01 PM pabel89 you dont need an fmu if using bigger injectors i t... Feb 13, 2008 - 2:47 PM mikecelica i do hav bigger injectors, i just got all my parts... Feb 13, 2008 - 4:01 PM
pabel89 no my car was choking because i didnt have it prop... Feb 13, 2008 - 4:14 PM mikecelica ohh the injectors are off another 7afte so it shud... Feb 13, 2008 - 5:17 PM pabel89 i have a .50 A/R compressor .63 A/R turbine. prett... Feb 13, 2008 - 5:54 PM trd94 ok the probe injectors well work,but you well need... Feb 13, 2008 - 5:58 PM pabel89 listen to trd94 he helped me alot when i was build... Feb 13, 2008 - 9:50 PM mikecelica QUOTE(trd94 @ Feb 13, 2008 - 10:58 P... Feb 13, 2008 - 11:58 PM mikecelica i dont realy understand this graph... What does it... Feb 14, 2008 - 12:22 AM mikecelica bump Feb 14, 2008 - 4:46 PM trd94 that is a small turbo. i have one that i used on m... Feb 14, 2008 - 6:16 PM mikecelica i see... i still have some time now since my mecha... Feb 14, 2008 - 9:00 PM trd94 it depends on when you want the power , at what rp... Feb 14, 2008 - 10:07 PM normality78 hi trd94,
perhaps u may wanna let him know the hp ... Feb 14, 2008 - 11:08 PM mikecelica i guess i'd be happy with 180hp... plus torque... Feb 14, 2008 - 11:20 PM normality78 Actually this is what im facing now. Im still find... Feb 15, 2008 - 7:57 AM pabel89 quick question about the 7afte, oil all around you... Feb 15, 2008 - 3:30 PM trd94 QUOTE(pabel89 @ Feb 15, 2008 - 3:30 ... Feb 15, 2008 - 4:30 PM trd94 most of my hp figures are on motor, and DD is Dail... Feb 15, 2008 - 4:25 PM pabel89 idk why all that oil was in the turbo, i clean it ... Feb 15, 2008 - 4:42 PM mikecelica got your car back from the mechanic? as in already... Feb 15, 2008 - 8:53 PM mikecelica Plus i was wondering can i use the stock oil pan f... Feb 15, 2008 - 8:57 PM trd94 QUOTE(mikecelica @ Feb 15, 2008 - 8... Feb 15, 2008 - 9:07 PM mikecelica I got about 105 miles on mine.. thing is i work at... Feb 15, 2008 - 9:14 PM trd94 QUOTE(mikecelica @ Feb 15, 2008 - 9... Feb 15, 2008 - 9:27 PM pabel89 no i been driving my 7afte for a month or so, no p... Feb 15, 2008 - 10:23 PM trd94 QUOTE(pabel89 @ Feb 15, 2008 - 10:23... Feb 16, 2008 - 7:29 AM mikecelica yeah i thought so too... alot of ppl i know said t... Feb 15, 2008 - 11:25 PM trd94 QUOTE(mikecelica @ Feb 15, 2008 - 11... Feb 16, 2008 - 7:33 AM pabel89 what do you mean by detonation on the motor?
what... Feb 16, 2008 - 9:13 AM trd94 QUOTE(pabel89 @ Feb 16, 2008 - 9:13 ... Feb 16, 2008 - 4:54 PM mikecelica just did a compression test done today and was 192... Feb 16, 2008 - 7:06 PM trd94 looks good to me, now i would make sure your timin... Feb 17, 2008 - 9:00 AM mikecelica just had a quick question is it the 2nd gen 3sgte ... Feb 20, 2008 - 11:28 AM presure2 QUOTE(mikecelica @ Feb 20, 2008 - 11... Feb 20, 2008 - 11:37 AM mikecelica got it thanks/ Feb 20, 2008 - 11:47 AM mikecelica OK i think im finally done the buying process, ive... Feb 22, 2008 - 11:31 PM jesterwr217 QUOTE(mikecelica @ Feb 22, 2008 - 11... Feb 24, 2008 - 7:05 PM mikecelica bump Feb 24, 2008 - 10:26 AM mikecelica anyone? Feb 24, 2008 - 2:35 PM CelicaST_CALI remember to gap ur plugs a lil smaller after the t... Feb 24, 2008 - 7:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 14th, 2025 - 2:03 AM |