Feb 15, 2008 - 9:12 AM
|
|
|
Enthusiast Joined Feb 14, '08 From pearland Currently Offline Reputation: 0 (0%) |
i am curious as to whether or not bolting on a 3sgte head onto my 5sfe block will work with out running a turbo on it. i want to make the 5sfe faster if possible but have done some research and discovered that nobody offers any aftermarket performance for the 5sfe. if i am able to swap the head what would i need to make it run efficently.
AP |
![]() |
Feb 16, 2008 - 11:52 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%) |
QUOTE(19mr291 @ Feb 15, 2008 - 8:12 AM) [snapback]641746[/snapback] i am curious as to whether or not bolting on a 3sgte head onto my 5sfe block will work with out running a turbo on it. i want to make the 5sfe faster if possible but have done some research and discovered that nobody offers any aftermarket performance for the 5sfe. if i am able to swap the head what would i need to make it run efficently. AP This will work, with time and money. BUT if you are planning on swapping in the 3sgte head and now turbo on your 5sfe block it will run like straight up DOOKIE. If you want power and stay all motor, why not just swap in the 3sge? -------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
19mr291 3sgte head on a 5sfe block Feb 15, 2008 - 9:12 AM
bslik http://www.6gc.net/forums/index.php?showto...=5sgt... Feb 15, 2008 - 9:21 AM
blckcelica95 you can do it but . it's going to be alot of ... Feb 15, 2008 - 11:03 AM
19mr291 when you say alot of money ...how much are you tal... Feb 15, 2008 - 1:27 PM
Kwanza26 it'll work... but it'll NEED to be built. ... Feb 15, 2008 - 1:33 PM
zbigb Here a guy that did it cheap
http://www.celicatec... Feb 16, 2008 - 11:45 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 20th, 2025 - 2:42 PM |