6G Celicas Forums

Welcome Guest ( Log In | Register )

> Swap Guys, ECU Question, AEM EMS Specific Related
post Feb 19, 2008 - 12:56 PM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




How easy would it be to repin my 92+ Computer to a 90-91 pinout for use with an AEM 1120 computer instead of the 1121? Reason I ask is that I may have an opportunity to snag an 1120 for much cheaper than the current going $1500-1600. If it's not a total rectal tear to do I would probably go this route in lieu of paying full price for a 1121 AEM EMS.


--------------------
 
Start new topic
Replies
post Feb 20, 2008 - 5:13 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




The aem has some basic autotune features... but you really will need to pay someone to tune the car from the ground up.
I would also throw in some 550cc injectors in there. That way, most of your base maps would be tuned for 550s, and then you can make minor adjustments to the WOT maps if you ever upgrade to a bigger turbo, instead of having to redo everything later on.


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Feb 20, 2008 - 6:47 PM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




QUOTE(lagos @ Feb 20, 2008 - 6:13 PM) [snapback]643762[/snapback]

The aem has some basic autotune features... but you really will need to pay someone to tune the car from the ground up.
I would also throw in some 550cc injectors in there. That way, most of your base maps would be tuned for 550s, and then you can make minor adjustments to the WOT maps if you ever upgrade to a bigger turbo, instead of having to redo everything later on.


I'll be doing most of teh tuning myself. Just would use the auto tune to get the VE tables dialed in close so I could fine tune, rather than try to come up with a map from scratch.

Injectors are staying as-is for now. I can't drop too much money on the car if I go this way. I still have the T/A project in full swing to finish up by summers end for the fall racing season.


--------------------

Posts in this topic
- Fastbird   Swap Guys, ECU Question, AEM EMS Specific Related   Feb 19, 2008 - 12:56 PM
- - x_itchy_b_x   I actually had to repin my 91 ecu to an mr2 93-95 ...   Feb 19, 2008 - 1:07 PM
- - x_itchy_b_x   your ecu has a serial on it and find the pinout fo...   Feb 19, 2008 - 1:10 PM
- - Fastbird   Good deal. I will probably try to snag this one t...   Feb 19, 2008 - 11:53 PM
- - x_itchy_b_x   indeed I did. I'm using a GM 3bar map along wi...   Feb 20, 2008 - 8:19 AM
|- - Fastbird   QUOTE(x_itchy_b_x @ Feb 20, 2008 - 9...   Feb 20, 2008 - 5:07 PM
- - lagos   The aem has some basic autotune features... but yo...   Feb 20, 2008 - 5:13 PM
|- - Fastbird   QUOTE(lagos @ Feb 20, 2008 - 6:13 PM...   Feb 20, 2008 - 6:47 PM
|- - presure2   QUOTE(Fastbird @ Feb 20, 2008 - 6:47...   Feb 20, 2008 - 7:22 PM
|- - Fastbird   QUOTE(presure2 @ Feb 20, 2008 - 8:22...   Feb 20, 2008 - 11:25 PM
- - lagos   Its not an issue of credit. If you got the skill t...   Feb 20, 2008 - 11:31 PM
- - Fastbird   Oh, I fully agree that the dyno is usually an inte...   Feb 21, 2008 - 12:13 AM
- - x_itchy_b_x   http://www.st18x.com/st185_ecu_pinouts.htm found ...   Feb 21, 2008 - 8:18 PM
|- - Fastbird   QUOTE(x_itchy_b_x @ Feb 21, 2008 - 9...   Feb 21, 2008 - 8:32 PM
- - Fastbird   Ok guys, help me out here. Above you can see my q...   Feb 21, 2008 - 10:07 PM
|- - phattyduck   QUOTE(Fastbird @ Feb 21, 2008 - 7:07...   Feb 22, 2008 - 12:27 AM
- - x_itchy_b_x   t and te1 are the same. i remember that much. go t...   Feb 21, 2008 - 10:17 PM
|- - Fastbird   QUOTE(x_itchy_b_x @ Feb 21, 2008 - 11...   Feb 21, 2008 - 10:54 PM
- - Fastbird   Charlie....thanks for that!!! I don...   Feb 22, 2008 - 8:28 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 20th, 2025 - 3:14 PM