 7AFTE, Check out page 3, one last question before the car goes to the shop |
 Feb 12, 2008 - 11:20 PM
|
 
|
 Enthusiast  Joined Jan 31, '07 From Ontario, Canada Currently Offline Reputation: 1 (100%)  |
Few questions i had about the 7AFTE setup:
1. Is a .45 trim t3 turbo ok size or too small? Lookng to make about 180hp or so 2. Is 3" exhaust too big, shud I go with 2 1/2? 3. Do i need an fmu if im gona use bigger injectors? thanks for any help This post has been edited by mikecelica: Feb 24, 2008 - 2:35 PM |
 |
Replies
|
Feb 22, 2008 - 11:31 PM
|
|
|
Enthusiast Joined Jan 31, '07 From Ontario, Canada Currently Offline Reputation: 1 (100%) |
OK i think im finally done the buying process, ive gathered eveerything i could think of now a quick check to make sure. ppl with 7afte, please check my list for final time before i take my car to the shop if theres ntyhing i am missing. thanks
- Turbo w/ External wastegate - Custom down pipe - Manifold - Manual boost control - Short ram intake - Walbro 255lph TT supra fuel pump - 330cc Probe Fuel Injectors - Oil feed line kit - Custom oil return line - Pre tapped and fitted oil pan - Greddy universal Intercooler piping kit - Front mounted intercooler - Blow off valve - Rev 2 3S-GTE turbo pressure sensor - SAFCII - NGK V-power spark plugs - Oil Pressure Gauge - Boost Gauge - Voltmeter Gauge - Stage 2 Clutch & Lightened flywheel |
|
Feb 24, 2008 - 7:05 PM
|
|
 Enthusiast Joined Feb 27, '07 From cape coral/ft myers florida Currently Offline Reputation: 7 (100%) |
QUOTE(mikecelica @ Feb 22, 2008 - 11:31 PM) [snapback]644789[/snapback] OK i think im finally done the buying process, ive gathered eveerything i could think of now a quick check to make sure. ppl with 7afte, please check my list for final time before i take my car to the shop if theres ntyhing i am missing. thanks - Turbo w/ External wastegate - Custom down pipe - Manifold - Manual boost control - Short ram intake - Walbro 255lph TT supra fuel pump - 330cc Probe Fuel Injectors - Oil feed line kit - Custom oil return line - Pre tapped and fitted oil pan - Greddy universal Intercooler piping kit - Front mounted intercooler - Blow off valve - Rev 2 3S-GTE turbo pressure sensor - SAFCII - NGK V-power spark plugs - Oil Pressure Gauge - Boost Gauge - Voltmeter Gauge - Stage 2 Clutch & Lightened flywheel wideband 02 sensor make sure those probe injectors will work get rid of the manual boost controller you control your boost by what size spring you put in the wastegate --------------------  BOOST GETS YOU LAID!!!! |
Posts in this topic
mikecelica 7AFTE Feb 12, 2008 - 11:20 PM
bccentaur3 That turbo size would be good for 180. I know its ... Feb 12, 2008 - 11:30 PM mikecelica i got an safc2, so i shud go with 2.5" exhaus... Feb 13, 2008 - 12:06 AM Celiracer18 go with 2.5" its best for a 7afte
plugs i th... Feb 13, 2008 - 1:01 PM pabel89 you dont need an fmu if using bigger injectors i t... Feb 13, 2008 - 2:47 PM mikecelica i do hav bigger injectors, i just got all my parts... Feb 13, 2008 - 4:01 PM
pabel89 no my car was choking because i didnt have it prop... Feb 13, 2008 - 4:14 PM mikecelica ohh the injectors are off another 7afte so it shud... Feb 13, 2008 - 5:17 PM pabel89 i have a .50 A/R compressor .63 A/R turbine. prett... Feb 13, 2008 - 5:54 PM trd94 ok the probe injectors well work,but you well need... Feb 13, 2008 - 5:58 PM pabel89 listen to trd94 he helped me alot when i was build... Feb 13, 2008 - 9:50 PM mikecelica QUOTE(trd94 @ Feb 13, 2008 - 10:58 P... Feb 13, 2008 - 11:58 PM mikecelica i dont realy understand this graph... What does it... Feb 14, 2008 - 12:22 AM mikecelica bump Feb 14, 2008 - 4:46 PM trd94 that is a small turbo. i have one that i used on m... Feb 14, 2008 - 6:16 PM mikecelica i see... i still have some time now since my mecha... Feb 14, 2008 - 9:00 PM trd94 it depends on when you want the power , at what rp... Feb 14, 2008 - 10:07 PM normality78 hi trd94,
perhaps u may wanna let him know the hp ... Feb 14, 2008 - 11:08 PM mikecelica i guess i'd be happy with 180hp... plus torque... Feb 14, 2008 - 11:20 PM normality78 Actually this is what im facing now. Im still find... Feb 15, 2008 - 7:57 AM pabel89 quick question about the 7afte, oil all around you... Feb 15, 2008 - 3:30 PM trd94 QUOTE(pabel89 @ Feb 15, 2008 - 3:30 ... Feb 15, 2008 - 4:30 PM trd94 most of my hp figures are on motor, and DD is Dail... Feb 15, 2008 - 4:25 PM pabel89 idk why all that oil was in the turbo, i clean it ... Feb 15, 2008 - 4:42 PM mikecelica got your car back from the mechanic? as in already... Feb 15, 2008 - 8:53 PM mikecelica Plus i was wondering can i use the stock oil pan f... Feb 15, 2008 - 8:57 PM trd94 QUOTE(mikecelica @ Feb 15, 2008 - 8... Feb 15, 2008 - 9:07 PM trd94 the only reason i am did the rings and bearings is... Feb 15, 2008 - 9:12 PM mikecelica I got about 105 miles on mine.. thing is i work at... Feb 15, 2008 - 9:14 PM trd94 QUOTE(mikecelica @ Feb 15, 2008 - 9... Feb 15, 2008 - 9:27 PM pabel89 no i been driving my 7afte for a month or so, no p... Feb 15, 2008 - 10:23 PM trd94 QUOTE(pabel89 @ Feb 15, 2008 - 10:23... Feb 16, 2008 - 7:29 AM mikecelica yeah i thought so too... alot of ppl i know said t... Feb 15, 2008 - 11:25 PM trd94 QUOTE(mikecelica @ Feb 15, 2008 - 11... Feb 16, 2008 - 7:33 AM pabel89 what do you mean by detonation on the motor?
what... Feb 16, 2008 - 9:13 AM trd94 QUOTE(pabel89 @ Feb 16, 2008 - 9:13 ... Feb 16, 2008 - 4:54 PM mikecelica just did a compression test done today and was 192... Feb 16, 2008 - 7:06 PM trd94 looks good to me, now i would make sure your timin... Feb 17, 2008 - 9:00 AM mikecelica just had a quick question is it the 2nd gen 3sgte ... Feb 20, 2008 - 11:28 AM presure2 QUOTE(mikecelica @ Feb 20, 2008 - 11... Feb 20, 2008 - 11:37 AM mikecelica got it thanks/ Feb 20, 2008 - 11:47 AM mikecelica bump Feb 24, 2008 - 10:26 AM mikecelica anyone? Feb 24, 2008 - 2:35 PM CelicaST_CALI remember to gap ur plugs a lil smaller after the t... Feb 24, 2008 - 7:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 13th, 2025 - 8:03 PM |