6G Celicas Forums

Welcome Guest ( Log In | Register )

> SO, i thought i was done, But wait~ deeaaasshhhhh mooooorrreeee
post Feb 25, 2008 - 5:51 PM
+Quote Post
posthum_n

Enthusiast

Joined Feb 13, '08
From knoxville
Currently Offline

Reputation: 0 (0%)




okay, so my clutch went out, i decide to change it......and do some other stuff to...(header, hot wires, and good tune up)

so i get it all out, and got it all put back.



my front left caliper now has a leak.....but it didn't look like it leaked at the piston...why?



when i had it on a jackstands i tested to make sure no chatter and that the tranny shifter smoothly.....everything was fine and tight.

when i drove it around the block it sounded fine.


i got on the interstate and drove maybe 10 miles and when i take off after stopping from the first time...it makes a clunk clunk clunk and sorta shakes when the clutch is say 1/3 of the way let off

the axles are 6 months old and the mounts were tighted and the rubber in them looked good.

any ideas?




also, since the header i lost alot of low end torque why?

 
Start new topic
Replies
post Feb 25, 2008 - 8:56 PM
+Quote Post
posthum_n

Enthusiast

Joined Feb 13, '08
From knoxville
Currently Offline

Reputation: 0 (0%)




left side underhood, i was driving so ya know....what confuses me is that it only does it when the clutch is being let off of

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 24th, 2025 - 7:12 AM